Hardmatic HH-300
Test Block Set
Testing stand applications These stands are used to mount Durometers. They allow constant-pressure hardness measurement by pressing the Durometer vertically on a workpiece. • Anyone can perform repeatable hardness measurement due to fewer possibilities of human error and measurement variations. • The supplied weights can be attached directly to a Durometer and allow constant-pressure hardness measurement of large samples for which a stand cannot be used. • The supplied weights are used for calibrating the spring tension of Durometers.
64AAA964
64AAA963
905693
811-332-10
264-505A
Order No.
Description
Calibration Set (Shore A Scale) Test Block 30* DURO (Blue) Test Block 60* DURO (Yellow) Test Block 90* DURO (Gray) Mahogany Box Calibration Set (Shore D Scale) Test Block 20* DURO (Blue) Test Block 40* DURO (Gray) Test Block 80* DURO (Black) “A” Scale Durometer Stand
64AAA964
K
64AAA590
64AAA962 64AAA794 64AAA796 64AAA963
“A” Scale Durometer Stand with Air Damper Combination “D” & ”A” Scale Durometer Stand O-Ring Fixture Set 1/16”, 3/32”, 1/8”, 3/16” and 1/4” O-Ring cross sections
264-505A
Digimatic Miniprocessor with printer Connecting Cable 40” (1m) for Durometer and Digimatic Miniprocessor
905693
* Values shown are nominal only. Test Block Size 2” x 2” x 1/4”
Need Support?
K-16
Powered by FlippingBook