Hardmatic HH-V400
SERIES 810 — Impact Type Hardness Testing Unit
Standard Accessories 11AAE901: Display unit 12BAS450: AC adapter 12BAS451:
HH-V400 is Mitutoyo’s newly designed rebound-type portable tester for metals with a compact body & high operability.
• LCD Interface • Ability to store 1800 measurements • Maintain up to 100 control groups • Preform statistical analysis on measured data • Rechargeable - No Batteries Required
USB 2.0 cable (Type A-C)
11BAB687: 11AAA857: 05CAA952: 11PAA429:
Handle
Small support ring (ø14 mm)
Phillips screwdriver
Storage box 99MBG538B: Quick start guide 99MBG537A: Instruction manual
Optional Accessories 11AAE902: Detector D 11AAE903: Detector DC 11AAE904:
810-306 : HH-V400 ASTM compliant rebound tester Includes Display unit - 11AAE901 & D Type Detector 11AAE902
Detector D +15 Detector DL Hardness test block
SPECIFICATIONS Model
11AAE905: 11AAD240: 19BAA248:
HH-V400 810-306
Support ring for convex cylindrical surfaces (R10 to 20 mm) Support ring For concave cylindrical surfaces (R14 to 20 mm) Support ring for convex spherical surfaces (R10 to 27.5 mm) Support ring for concave spherical surfaces (R13.5 to 20 mm):) Carbide ball for Detectors D, DC, and D +15 Replacement ball shaft for Detector DL
Order No.
19BAA249:
Testing hardness and range Testing direction
Leeb hardness: 100.0 to 999.9 HLD
19BAA250:
Omnidirectional (with automatic angle-correcting function)
Vickers hardness: 43 to 950 HV Brinell hardness: 20 to 655 HB
19BAA251:
Hardness scale conversion function* (Conversion range varies depending on material)
19BAA457:
Rockwell hardness (C-scale): 19.3 to 68.2 HRC Rockwell hardness (B-scale): 13.5 to 101.7 HRB Shore hardness: 30.1 to 99.5 HS (ASTM) 13.2 to 98.6 HS (JIS) Tensile strength: 390 to 1999 MPa
19BAA458:
Calibration Blocks 64HAA467:
Minimum thickness: 5 mm Minimum mass: 5 kg Testing position: At least 5 mm from the edge of the sample and at least 3 mm between test points Surface roughness: Ra 2.0 or less Automatic angle correction, offset setting, acceptance judgment, hardness scale conversion, data memory storage (1800 points), statistical calculation function, eco mode, auto power-off, backlight
520 HLD range leeb hardness standard 630 HLD range leeb hardness standard 730 HLD range leeb hardness standard 800 HLD range leeb hardness standardl
64HAA468: 64HAA469: 64HAA470:
Sample conditions
Functions
Type
Detector D (standard type), impact hammer, with carbide ball at the tip
Detector
Dimensions
ø28 x 175 mm (excluding cable)
Mass
Approx. 150 g
Screen
2.83’’ (240 x 320 pixels), RGB color LCD
Display unit
Dimensions
174 x 68 x 32 mm
Mass
Approx. 250 g
Get a Quote
C adapter, built-in battery (Ni-MH) (Up to 8 hours of operation after 100 minutes of charging)
Power supply
* HH-V400 guarantees the indicated values based on Leeb hardness. Converted values are for reference only.
Detector Convversion Ranges
Detector D, DC
Material
HV/Vickers 80 to 940 80 to 898
HB/Brinell 80 to 647
HRC/Rockwell C HRB/Rockwell B HS (ASTM)/Shore VHS (JIS)/Shore MPa/Tensile strength
Iron and steel
20.0 to 68.0 20.4 to 67.1
38.4 to 99.5
30.1 to 99.5
13.2 to 98.0
390 to 1999
K
Alloyed tool-steel
—
— — —
— — — — — — — —
— — — — — — — —
— — — —
Gray iron
— —
93 to 334 131 to 387 85 to 655 40 to 173 45 to 315 20 to 159 60 to 290
— —
Spherical graphite cast iron
Stainless steel
85 to 802 43 to 196
19.6 to 62.4
46.5 to 101.7 13.5 to 95.3
Brass
— — — —
499 to 701
Casting copper-based alloys Casting aluminum-based alloys
— — —
— — —
— — —
Copper-tin-based alloys
Detector D +15
Material
HV/Vickers 80 to 937 80 to 935
HB/Brinell 80 to 638
HRC/Rockwell C HRB/Rockwell B HS (ASTM)/Shore VHS (JIS)/Shore MPa/Tensile strength
Iron and steel
19.3 to 67.9 19.8 to 68.2
— —
33.3 to 99.3
35.3 to 97.8
394 to 1991
Tool steels for cold-work
—
—
—
—
Detector DL
Material
HV/Vickers 80 to 950
HB/Brinell 81 to 638
HRC/Rockwell C HRB/Rockwell B HS (ASTM)/Shore VHS (JIS)/Shore MPa/Tensile strength
Iron and steel
20.6 to 68.2
37.0 to 99.9
30.6 to 96.8
32.3 to 98.6
390 to 1976
K-14
Powered by FlippingBook