Formtracer
Surface Roughness/Contour Analysis Program FORMTRACEPAK
• FORMTRACEPAK functions offer total support for controlling the measurement system, surface roughness analysis, contour analysis, contour tolerancing, and inspection report creation.
• An accuracy-guaranteed temperature range of 10 to 40 °C is possible thanks to a combination of technologies, such as the symmetric guide structure, uniform material and temperature compensation. • A contamination resistance more than 2 times better than Mitutoyo's conventional machine’s is achieved by adopting a newly developed environment-resistant absolute scale*.
* Absolute scale that provides an absolute XYZ- values relative to an internal reference point for each coordinate captured. This eliminates the need for an initialization operation.
• Editing measurement procedures The items displayed in the measuremaent procedure window can be directly modified. You can, for example, perform new analyses by modifying the evaluation setup or roughness standard.
• Versatile graphics windowing for data and analysis
• Operation messaging The operation message window for explaining the next step is incorporated.
• Tab-selection graphics window Just select a tab to display the measurement data required, such as contour, roughness, or tolerancing results. • Dividing the screen into two or four windows The screen can be divided into two, or four, windows for the convenient display of measurement data (for contour and roughness), analysis results, and contour tolerancing data, as required.
• Measurement control To make only a single measurement, you can create a part program in the single mode. To measure multiple workpieces of an identical shape, you can use the teaching mode. Since you can embed the entire flow, from making measurement to printing a report, into a part program, you can efficiently make measurements, analyze data, and output a report. A function is also provided that enables you to insert comments accompanied with photographs at desired timings, enabling you to embed the roles described in a measurement procedure document that specifies important points such as work settings.
J
Where to Buy
Surface Roughness/Contour Analysis Software FORMTRACEPAK
• Displaying the results in the graphics window You can paste the graphics obtained from measurements, as well as measurement values (including pass/fail results) and an analysis graph, into the graphics window. This enables you to check the graphics and
To make immediate measurements, you can use the pull- down menu to easily select and call up the desired operating procedure.
measurement results at a glance using the graphics window alone.
Catalog No. E15018(4)
Refer to the FORMTRACEPAK Brochure ( E15018(4)-US ) for more details.
J-15
Powered by FlippingBook