Formtracer
FTA-H3000 Series SERIES 525 — Contour and Surface Roughness Measuring System
• FTA-H3000 Series are highly functional and user- friendly surface texture measuring systems with innovative design features. They enable simultaneous measurement of both surface roughness and contour without changing the detector. • Large-sized base models and high-column models are newly added to the line-up. • Equipped with a wide range and high resolution Z1- axis detector. • FTA-H3000 Series comes with the inclined drive unit as standard, making approach to the target surface and measurement of large workpieces much easier. • Equipped with an operability focused, new style remote box. The new part program key strongly supports manual part-programming. • High throughput is achieved thanks to high drive speed (X-axis: Max. 80 mm/s, Z2-axis: Max. 30 mm/s). • All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement. • The Z1-axis detector is equipped with a built-in anti- collision safety device.
FTA-H3000
FTA-H3000 (with monitor arm)
Contour and Surface Roughness Measuring Systems FORMTRACER Avant Series
Inclinable drive unit
Refer to the FORMTRACER Avant Series Brochure ( E15030(2)-US) for more details.
Connecting cables are contained within the measuring instrument.
Detector sliding mechanism
Catalog No.E15030(2)
J
Contour & Roughness Detector H3000
SPECIFICATIONS Model No.
FTA-S4H3000 FTA-H4H3000 FTA-W4H3000 FTA-L4H3000 FTA-S8H3000 FTA-H8H3000 FTA-W8H3000 FTA-L8H3000 inch/mm 525-241-13 525-242-13 525-243-13 525-244-13 525-246-13 525-247-13 525-248-13 525-249-13
X-axis Z1-axis
100 mm
200 mm
Measuring range
16mm (±8mm from the horizontal position)
Straightness (when the X-axis is horizontal)
0.2 µm/100 mm
0.6 µm/200 mm
X-axis
±(0.8+0.01L) µm L = Measurement Length (mm)
(0.8+0.015L) µm L = Measurement Length (mm)
Accuracy (20 °C)
Z1-axis (detector unit) Detection method
±(0.5+ | 2H | /100) µm H = Measurement height from the horizontal position (mm)
Arc scale (RT-10µm)
Measuring force
0.75 mN
Detector (Z1-axis)
Standard
Tip radius 2 μm, Tip angle 60°, Diamond (surface roughness/contour)
Stylus tip
Cone
Tip radius 25 μm, Tip angle 30°, Sapphire (contour)
Stroke limit function
Specified range: -7mm to +7mm Positioning accuracy range: ± 1 mm
X-axis inclination angle
±45°
Z2-axis (column) travel range
300 mm
500 mm
700 mm 300 mm
500 mm
700 mm
Base size (W×D)
600×450 mm
1000×450 mm
600×450 mm
1000×450 mm
Base material Granite Note: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.
J-12
Powered by FlippingBook