Contracer
Contracer CV-2100 SERIES 218 — Contour Measuring Instruments
Contour Measuring System enabling measurement that is fast, accurate, and easy.
• The operation flow is significantly shortened
by arranging the controls for stylus position change,
measurement start/stop and return on the front of the drive unit. • Fine and coarse X-axis positioning can be performed easily by using the jog shuttle that covers the whole measuring range. • The quick-vertical- motion stand allows operators to swiftly and easily move the drive unit to and from the measurement height without having to push or pull (only for CV-2100M4).
Centralized front control panel
CV-2100M4
Motor-driven jog shuttle
Optional Column Stand for CV-2100N4 • Allows the use of the CV-2100N4 in a fixed configuration. 218-042
CV-2100N4
Base material: Granite Inclination range: ±45° Vertical travel: 320 mm Mass: 110 kg Note: While the appearance of the
Quick-vertical-motion stand
• The detector unit (Z1-axis) is equipped with a highly accurate arc scale. This scale directly tracks the arc locus of the stylus tip so that the most accurate compensation can be applied to the scale output, which leads to higher accuracy and resolution. Operators are free from bothersome operations such as measurement magnification switching and calibrating each magnification as required for analog instruments.
Desktop PC
natural stone measuring table varies according to the source,
the high stability for which this material is known can always be relied upon.
CV-2100M4
SPECIFICATIONS Model No.
Highly accurate arc scale
CV-2100M4 218-643-13
CV-2100N4 218-623-13
inch/mm
X-axis
100 mm 50 mm
Measuring range
Z1-axis (detector unit)
Z2-axis (column) travel range
350 mm
—
J
X-axis inclination angle
±45°
X-axis Z1-axis X-axis
0.1 µm 0.1 µm
Resolution
Motor (0 to 20 mm/s)
Drive method
Vertical travel (Z-axis column)
Manual (Quick-vertical-motion, fine)̶
Measuring speed
0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 mm/s
Straightness (when the X-axis is horizontal)
2.5 µm/100 mm
X-axis Z1-axis
±(2.5+0.02L) µm L = Measurement Length (mm)
Accuracy (20 °C)
Contour Measuring System CONTRACER CV-2100 Series
±(2.5+|0.1H|) µm H = Measurementt height from horizontal position within ±25 mm
Measuring direction
Both pulling and pushing directions
Measuring face direction
Downward direction 30±10 mN （ 3 gf ）
Measuring force
Traceable angle (using the standard stylus) External dimensions (W×D×H)
Ascent 77°, Descent 87° (according to surface property)
745×450×885 mm
651×143×138.5 mm
Mass 5.8 kg Note 1: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon. Note 2: For the CV-2100N4 , a manual column stand (optionally available) or custom fixture is required. 145.8 kg
Catalog No.E15020(5)
Refer to the Contracer CV-2100 Series Brochure ( E15020(5)-US ) for more details.
J-8
Powered by FlippingBook