Surftest
Surftest SJ-500/SV-2100 SERIES 178 — Dedicated Control Unit Type Surface Roughness Tester
High precision and high performance type surface roughness tester with a dedicated control unit, offering a user-friendly display and simple operation. • Equipped with a 7.5-inch, color TFT LCD, color icons and touch panel controls, the display unit is easy to read and simple to operate. • A built-in joystick on the control unit allows quick and easy positioning. The manual adjustment knob allows fine positioning of a small stylus for measuring small holes. • In addition to the roughness parameters compliant with ISO/JIS/ANSI/VDA surface roughness standards, contour analysis is also available.
SV-2100S4
SJ-500
SV-2100M4
SPECIFICATIONS Model No.
SJ-500
SV-2100M4 * 1
SV-2100S4 * 1 178-681-01A
SV-2100H4 * 1 178-683-01A
SV-2100W4 * 1 178-685-01A
178-533-11
178-637-11
inch/mm
0.75mN
0.75mN
0.75mN
0.75mN
0.75mN
Detector Measuring Force
—* 2
Stand type Measuring range
Manual stand
Motorized stand
Z1-axis (detector)
800 µm, 80 µm, 8 µm
X-axis X-axis
50 mm
100 mm
0.05 µm
Z1-axis (detector) Z2-axis (column)
0.01 µm (800 µm), 0.001 µm (80 µm), 0.0001 µm (8 µm)
Resolution
—
—
1 µm
Assessed profile
Primary profile, Roughness profile, Waviness profile, DF profile, Roughness motif profile, Waviness motif profile
*1 While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon. *2 Stand for SJ-500 is optional.
Surftest SJ-500P SERIES 178 — D ata Processing Unit (PC) Surface Roughness Testers
FORMTRACEPAK: Best-selling Surface Roughness Analysis Program Best-selling dedicated software for surface roughness measurement and analysis. Features a flexible printer format and creation of an original inspection certificate.
A superior data processing tester with PC data analysis for higher efficiency. Note: If a power column type (SV-2100S4/H4/W4) with PC data-processing is required, consider the FORMTRACER Avant S3000 Series (Refer to page L-9 for specifications).
J
SJ-500P
Type of data processing unit SPECIFICATIONS
PC type SJ-500P
Model No.
178-534-23
inch/mm
0.75mN
Detector Measuring Force
—* 2
Elevating shaft mechanism of stand
Roughness Measuring System Surftest SJ-500/SV-2100
X-axis
50 mm
Measuring range
Z1-axis (detector)
800 µm, 80 µm, 8 µm
Z2-axis (column) travel range
—
X-axis
0.05 µm
Resolution
Z1-axis (detector) Z2-axis (column)
0.01 µm (800 µm), 0.001 µm (80 µm), 0.0001 µm (8 µm)
—
Applicable standards
JIS 1982/JIS 1994/JIS 2001/ISO 1997/ANSI/VDA
Assessed profile Primary profile, Roughness profile, Waviness profile, Filtered waviness profile, Rolling circle waviness profile, Rolling circle center line waviness profile, Envelope residual profile, DIN4776 profile, Roughness motif profile, Waviness motif profile *1 While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon. *2 The simplified stand or manual column stand is available as an optional accessory.
Catalog No.E15006(6)
Refer to the Surftest SJ-500 / SV-2100 Brochure ( E15006(6)-US ) for more details.
J-6
Powered by FlippingBook