Surftest
Optional Accessories for Surftest SJ-220/310
Detector
Unit: mm
• Standard detectors
• Small hole detectors
• Extra small hole detectors
Order No. Measuring force Stylus profiles* Remarks 178-296 0.75 mN 2 µmR/60˚ Dedicated to the standard / retractable drive unit 178-390 4 mN 5 µmR/90˚ 178-387 0.75 mN 2 µmR/60˚ Dedicated to the transverse tracing drive unit 178-386 4 mN 5 µmR/90˚ 178-391 4 mN 10 µmR/90˚ Dedicated to the standard/ retractable drive unit *Tip radius/Tip angles 16.4 Stylus 61
Order No. Measuring force
Stylus profiles* Remarks
Order No. Measuring force Stylus profiles* Remarks 178-384 0.75 mN 2 µmR/60˚ Minimum measurable hole diameter: ø2.8mm 178-393 4 mN 5 µmR/90˚ *Tip radius/Tip angles 60.3 Stylus
178-383 0.75 mN 2 µmR/60˚ Minimum
measurable hole diameter: ø4.5mm
178-392 4 mN 5 µmR/90˚ *Tip radius/Tip angles 16.2 60.7 Stylus
60.3 60.3 1.6 12.8 12.8
60.7 Stylus 60.7 Stylus 4.5
60.7 Stylus Stylus
60.3
16.2 16.2 1.2
Stylus Stylus
12.8 12.8
16.2
Stylus Stylus
3.5
0.8
61
61
3.5
4.5
1.6
3.5
4.5
1.6
1.6
Stylus Stylus 61
16.4 16.4
Stylus Stylus
1.2
16.4
0.8
3.5
3.5
4.5
1.6
1.2
1.2
0.8
4.8
1.2
0.8
59.5
1.5
3.5
3.5
4.8
• Deep groove detectors
4.8
3.5
59.5 59.5
1.5
4.8
59.5
1.5
1.5
1.5
Order No. Measuring force Stylus profiles* Remarks 178-385 0.75 mN 2 µmR/60˚ Not available for the transverse tracing drive unit 178-394 4 mN 5 µmR/90˚ *Tip radius/Tip angles
• Gear-tooth surface detectors
Order No. Measuring force Stylus profiles* 178-388 0.75 mN 2 µmR/60˚ 178-398 4 mN 5 µmR/60˚ *Tip radius/Tip angles 12.6
60.1 Stylus Stylus 60.1 Stylus
61 Stylus Stylus 61 Stylus
3.5
16.4
60.1 Stylus 60.1 Stylus
61 Stylus 61 Stylus
3.5
12.6
16.4 16.4
3.5
3.5
12.6
12.6
16.4
1.4 0.6 1.4 0.6
2
4.8
1.4 0.6
1.5
2
4.8
1.4 0.6
1.4 0.6
1.5
2
4.8
2
4.8
1.5
1.5
1.5
Optional Accessories for Drive Units
• Nosepiece for flat surfaces
Nosepiece for cylindrical surfaces 12AAA218 • Nosepiece for cylindrical surfaces 12AAA218 Nosepiece for cylindrical surfaces 12AAA218
12AAA217 • Standard accessory for the standard/retractable drive unit of the SJ-310 Series • Not available for the transverse tracing drive unit
Nosepiece for flat surfaces 12AAA217
Nosepiece for flat surfaces 12AAA217
• Standard accessory for the standard/retractable drive unit of the SJ-310 Series • Not available for the transverse tracing drive unit
• V-type adapter 12AAE644
• Point-contact adapter 12AAE643 • Transverse tracing type standard accessory. • Dedicated to the transverse tracing drive unit.
7.7 mm
• Transverse tracing type standard accessory. • Dedicated to the transverse tracing drive unit.
J
• Extension cable (1 m) (Note: Only one rod can be used.) 12BAA303 • For the connection between the calculation display unit and drive unit • Support feet set
Extension rod 50 mm 12AAA210 12AAA210 • Not available for the transverse tracing drive unit • Extension rod (50 mm) (Note: Only one rod can be used.) • Not applicable to upward measurement.
Support feet set 12AAA216
• Adapter for flat surface 12AAA219 • Not available for the transverse tracing drive unit
12AAA216 • Standard accessory for the standard/retractable drive unit of the SJ-310 Series • Not available for the transverse tracing drive unit • Adjustment range is 28 mm from bottom face.
Adapter for flat surface 12AAA219
Detector side
• Height gage adapter Note: Suitable for a height gage holder designed for 9×9 mm section scribers.
• Magnetic stand adapter 12AAA221
Magnetic stand adapter 12AAA221
Height gage adapter 12AAA222
12AAA222 (9x9mm) 12AAA233 (1/4x1/2")
Mounting spigot diameter is 8 mm. 12AAA220 Mounting spigot diameter is 9.5 mm.
J-4
Powered by FlippingBook