Micrometers
New Digimatic S1 Output S1 is the new Mitutoyo bidirectional output format that enables reading and writing information to the gages such as sending data, sending a zero command, calibration date warnings, and the ability to poll the serial number for smoother measurement operation. Communication supported by new Input Tools.
Functions Preset (ABS measurement system) : The measurement origin can be preset to any value within the display range for convenience in measuring. Zero-setting (INC measurement system) : The display can be zeroed at any position of the spindle, making comparison measurement easier. Returning to the absolute-measurement mode is easily accomplished. Hold : The function that holds the display of value is useful when it is difficult to see the measured value at the measurement point. When the function is cancelled, the previous zero-set point or a measured value with reference to the origin is displayed. Calibration alert : This function gives an alert when the instrument is approaching its calibration date and again on the actual calibration due date, helping to ensure better measuring instrument management by preventing missed calibrations. Approach speed warning : Reduces variation in measurement values and improves The function determines whether a measured value is within the range between the upper and lower tolerance limits and displays the result with a tolerance judgment mark. Function lock : Functions such as preset or zero-set can be locked to avoid inadvertently changing the origin position. Auto power ON/OFF : reliability of measurements. Tolerance judgment : The reading on the LCD disappears after this instrument is idle for approx. 20 minutes, but the origin point is retained. Turning the spindle causes the reading on the LCD to reappear. Key customization : Frequently used functions can be assigned to buttons and called back easily, improving work efficiency. Measurement data output : Measurement data can be output, allowing easy incorporation of this instrument into a statistical process control or measurement system. Error display : In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected. Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that
B
GO/NG icons
Auto-calculate
Calibration alerts
Forewarning
Calendar icon flashes
Displays tolerance judgment mark Tolerance judgment function: ON
Correction value can be read directly Calculation function: ON Calculates and displays correction value
Pass
Due date
Entire display flashes
− NG
+ NG
Customized key setting allows the user to easily switch between measurement values and calculation results with the press of a button.
DIMENSIONS
Unit: mm
the battery needs to be replaced. Optional Accessories Order No. Type
a
L (Minimum measuring length)
25
2
48.5
63.6
Description
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U
264-020
—
2.5
06AGL111 06AGL121
SA Connection cable (1 m) SA Connection cable (2 m) SA USB Input Tool Direct (2 m)
06AGQ001A
264-622 264-623 264-626 264-627
U-WAVE-TM
IP67
L
a 9
b
Range (mm)
Buzzer U-WAVE-TM
0 - 25 25 25 - 50 25 9.8 32.5 50 - 75 50 12.6 47 75 - 100 75 14 60 0
U-WAVE-TMB
IP67
Buzzer U-WAVE-TMB
02AZF960 Connecting unit for U-WAVE-TM / TMB For additional accessories refer to pages B-70 - B76 IP67
B-6
Powered by FlippingBook