for Profile Projectors QM-Data Interface Unit
The QM-Data200 is a geometric readout/analysis unit for optical instruments such as profile projectors. This unit features powerful 2-D coordinate measurement capabilities with easy-to-use key operation. Measurement results can be visualized on the LCD display and printed out if required.
2-D Data Processing Unit QM-Data200
Basic Element Measurement
Point Coordinates (multi-point processing for a maximum of 100 points)
Line Angle and perpendicularity with the X-axis. (multi- point processing for a maximum of 100 points)
Circle Center coordinates, diameter, roundness (multi-point processing for a maximum of 100 points) Slotted Hole Center coordinates, length, width, radius of slotted hole
Point-point distance Distance, coordinates difference, radial difference
Note: In multi-point processing, the mean value is used as the measured value.
Rectangular Hole Center coordinates, length, width
Intersection Point & Intersecting Angle Intersection coordinates, intersecting angle, supplementary angle
Ellipse Center coordinates, major- axis diameter, minor-axis diameter, angle with the X-axis, departure from the X-axis (multi-point processing for a maximum of 100 points)
Operation screen (Counter)
Pattern Measurement
Linear-point Distance Perpendicular (shortest) distance
Line-circle distance Center-center distance,
Pitch Point-point distance, difference between coordinates, angle, cumulative distance, cumulative angle
Circle-circle distance Center-center distance,
longest distance, shortest distance
longest distance, shortest distance, difference between coordinates, radial difference
SPECIFICATIONS Model No.
QM-Data200
Stand-mount type
Arm-mount type
Order No.
264-160-13A
264-161-13A
OPTOEYE 200 (Automatic Edge Detection)
Display languages (selectable) Measured value unit
Japanese/English/German/French/Italian/Spanish/Portuguese/Czech/ Chinese(simplified/ traditional)/Korean/Turkish/Swedish/Polish/Dutch/Hungarian
Length: mm Angle: degree/degree minute second (selectable)
Resolution
0.1 μm
Program functions
Part program creation, execution, editing
Number of data, maximum value, minimum value, mean value, standard deviation, range, histogram, statistics on a measuring function basis (by command)
Statistical processing
Display system
COLOR TFT LCD (with LED backlight)
Edge Sensor Position Compensation
Supported (Projector)
I
XYZ: Maximum of three Linear Scales RS-232C 1: For connecting to external PC
PJ-H30 with OPTOEYE 200
RS-232C 2: For connecting to counter of measuring instrument OPTOEYE: For inputting edge signal from OPTOEYE (OPTOEYE 200)
Input /Output
FS: For connecting to optional foot switch PRINTER: For connecting to optional printer USB-MEMORY : For connecting to USB memory
Measurement result file output
RS-232C output (CSV format, MUX-10 format)
Power
100 to 240 V AC
Maximum power consumption External dimensions (W×D×H)
17 W (does not include optional accessories)
OPTOEYE 200 and detector mounting plate A
Approximately 260×242×310 mm (including the stand)
Approximately 318×153×275 mm (when the arm is in the horizontal posture)
Surface illumination
332-161 OPT-200
Halogen bulb (24V 150W)
Model No. Illumination
Mass
Approximately 2.9 kg
Approximately 2.8 kg
Contour/ surface *1 Non-directional
PJ-PLUS Series PJ-H30 Series PV-5110 *1 PH-3515F *1
PJ-PLUS Series PJ-H30 Series PV-5110 PH-3515F
Detecting directivity
Applicable models
Minimum detectable circle Minimum detectable line width Maximum response speed Illumination range (Bright) Bright-Dark field difference
ø2 mm
1 mm
Optional accessories
AC adapter, power cable, Easy operation guide
4.5 mm/s (10 X lens)
30 to 2000ℓ
*1 The arm-mount type cannot be used concurrently with a counter stand. Note: For details, refer to the QM-Data200 and Vision Unit brochure.
20 ℓX or higher
Repeatability (contour illumination)
σ =1 μm
*2
*1, *2 Mitutoyo’s test conditions.
I-12
Powered by FlippingBook