ABSOLUTE Digimatic Scale Units
Applicable models: SD-G
SD ABSOLUTE Digimatic Scale Units SERIES 572
• SD series facilitates mounting on jigs, tools, and small machine tools to enable accurate positioning. • Built-in ABSOLUTE scale including the ABS point does not require a zero-set every time the power is turned on. In addition, reliability has improved thanks to elimination of overspeed errors. • Horizontal or vertical display according to the scale mounting direction. • The dust resistance and the environmental resistance of the display has improved. The SD-G series offers dust/water protection level IP66. • Long battery life. • EC counters are available as external display units. • Equipped with an output port to transfer measurement data, allowing implementation in control systems and gaging systems. Functions • ABS (ABSOLUTE) measurement function • INC (Incremental) measurement function • Zero-setting function • Presetting function (2 preset values can be set. Not available for SD-G, SD-AX, SD-D, SDV-D) • Double reading function (Available only for SD-F or SDV-F) • Direction switch function (Available only for SD-E, SDV-E) • Hold function* • Measurement value composition error alarm • Low battery alarm • Output function * To activate the hold function when using SD-AX, SD-D or SDV-D models, an optional hold unit is required. Simultaneous activation with the output function is not available. Note: These units use 1.5 V silver oxide cells for the power supply. Therefore, when the units are directly fixed to the frame of a machine tool that requires a high voltage, malfunctions such as display digit fluctuations and errors may occur. Countermeasure examples are described in the user manuals provided.
Horizontal single-function type (Water-proof type) 572-602 SD-20G
Horizontal single-function type 572-202-30 SD-20AX 572-203-10 SD-30D
Horizontal multi-function type 572-461 SD-15E
Vertical single-function type 572-303-10 SDV-30D
Vertical multi- function type 572-561 SDV-15E
Typical Applications Machine table position
Drilling machine stroke position
Focus setting on optical instruments
H
Special Applications
Please contact Mitutoyo for special applications.
Digital Scale and DRO Systems
ABSOLUTE DIGIMATIC SCALE UNITS
Catalog No. E316-572R
Our products are classified as regulated items under Japanese Foreign Exchange and Foreign Trade Law. Please consult us in advance if you wish to export our products to any other country. If the purchased product is exported, even though it is not a regulated item (Catch-All controls item), the customer service available for that product may be affected. If you have any questions, please consult your local Mitutoyo sales office.
Coordinate Measuring Machines Vision Measuring Systems
Test Equipment and Seismometers Sensor Systems Optical Measuring Form Measurement
Small Tool Instruments and Data Management Digital Scale and DRO Systems
ABSOLUTE Digimatic Scale Units
Mitutoyo Corporation 20-1, Sakado 1-Chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213-8533, Japan T +81 (0) 44 813-8230 F +81 (0) 44 813-8231 http://www.mitutoyo.co.jp
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves may be regarded as definitive. Our products are classified as regulated items under Japanese Foreign Exchange and Foreign Trade Law. Please consult us in advance if you wish to export our products to any other country. If the purchased product is exported, even though it is not a regulated item (Catch-All controls item), the customer service available for that product may be affected. If you have any questions, please consult your local Mitutoyo sales office.
Refer to the ABSOLUTE Digimatic Scale Units Brochure ( E316-572R ) for more details.
As a measurement jig for outdoor use (SD-G)
Detector head mechanism
The Mitutoyo Quill Kit mounted on a vertical mill
H-3
Powered by FlippingBook