Laser Scan Micrometer
Optional Accessories SERIES 544 — Laser Scan Micrometer (Display Unit)
Digimatic code output unit
• 2-channel Digimatic code output • In simultaneous measurement, measurement data are output as follows: Program No. 0 to No. 4 in OUTPUT-1 Program No. 5 to No. 9 in OUTPUT-2 (10 programs operated)
• 10 pin MIL type connector. • Output cable is not supplied. Connecting cable (optional) 1 m (936937) • Available for LSM-6200 ( 544-071 , 544-072 ) and
SPECIFICATIONS Order No.
02AGC840
XY Measurement
LSM-6902H ( 544-498-1 , 544-499-1 ). Note 1: Output is 6 digits of measurement data. Note 2: Displaying 6th and 7th digit after the decimal point is not supported. Dual connection unit • Enables second unit connection to LSM-6200 ( 544-071 , 544-072 ). (both units must be the same model) Note: Cannot be used for LSM-6902H ( 544-498-1 , 544-499-1 ). • Depending on the layout of the two measuring units, large-diameter measurement, XY measurement, and parallel measurement are possible. • Both of the measuring units and display units can be simultaneously operated.
Y
X
(X–Y): runout (X+Y)/2: average Note: XY requires 10 mm-interval.
SPECIFICATIONS Order No.
G
02AGP150
Parallel Measurement
2nd I/O analog I/F • I/O, analog output. • Simultaneous measurement is supported by two pairs of GO/NG judgment outputs. • Available for LSM-6200 ( 544-071 , 544-072 ) and LSM-6902H ( 544-498-1 , 544-499-1 ).
SPECIFICATIONS Order No.
02AGC880 Standard Accessories Connector (DDK) 57-30360 ( 214188 )
• Both BCD ( 02AGC910) and 2nd I/O analog I/F ( 02AGC880 ) can be mounted on LSM-6200 ( 544-071 , 544-072 ) and LSM-6902H ( 544-498-1 , 544-499-1 ) using this cable. Note: If using this cable, the dual connection unit ( 02AGP150 ) cannot be used. Cable for BCD and 2nd I/O simultaneous mount
SPECIFICATIONS Order No.
02AGE060
Unit: mm
DIMENSIONS
200 ±10
120 ±10
G-42
Powered by FlippingBook