Laser Scan Micrometer
Optional Accessories SERIES 544 — Laser Scan Micrometer (Measuring Unit)
• Standard gage set suitable for calibration of Laser Scan Micrometers. • Nominal gage diameters (1 to 160 mm) are as given in Specifications. Standard calibration gage set
SPECIFICATIONS For calibrating models
LSM-6902H 02AGD180 02AGD181
LSM-500S 02AGD110 02AGD111 ø0.1: 958200 ø2 : 958202
LSM-501S 02AGD120 02AGD121 ø0.1: 958200 ø10: 229317
LSM-503S 02AGD130 02AGD131
LSM-506S 02AGD140 02AGD141
LSM-512S 02AGD150 02AGD151 ø20: 229730 ø120: 234072 02AGD990
LSM-9506 02AGD170 02AGD171
Set No.
Stand Gages
ø1: 02AGD920 ø25: 02AGD963
ø1: 02AGD920 ø30: 02AGD961
ø1: 02AGD920 ø60: 02AGD962
ø1: 02AGD920 ø60: 02AGD962
Configuration (Order No.)
02AGD190
958203
958203
02AGD980
02AGD980
02AGD970
Carrying case
Measurement Examples
Adjustable workstage
• Easy set-up and height adjustment enables high- precision measurement. Workstage SPECIFICATIONS
• Vertical/horizontal slide mechanism enables easy measurement of various workpiece diameters. • Suitable for quality control of high-precision shafts, rollers, pin gages and similar.
Roller of copying machine
Pin gage or plug gage
LSM-501S LSM-503S LSM-6902H 02AGD270
Model
G
Order No.
Basic configuration Basic set
Order No. 02AGD280 02AGD400 02AGD490 02AGD520 02AGD370 02AGD680
Model
Standard Accessories
Measuring range (mm)
Horizontal stroke (mm)
Vertical stroke (mm)
LSM-6902H LSM-501S LSM-503S LSM-506S *
0.1 - 25 0.05 - 10 0.3 - 30
130 130 200 300 200 300
47 32 35 45 45 45
V-block ( 02AGD420 ), 2 pcs. Stopper ( 02AGD430 ), 1 pc. V-block A ( 02AGD550 ), 2 pcs. V-block B ( 02AGD560 ), 1 pc. V-block C ( 02AGD570 ), 1 pc.
1) Main unit 2) V-block 3) Stop
1 - 60
0.5 - 60 0.5 - 60
LSM-9506 *
* The stop is not included in the basic set for these models. Note: Optional part for the adjustable workstage, such as center support, adjustable V-block (up/down) etc., are available.
• Used for supporting measurement of outside diameter of fine wire-like materials such as magnetic wire or fiber. Guide pulley
SPECIFICATIONS Model
LSM-500S 02AGD200
LSM-501S 02AGD210
Order No.
Note 1: Each measurement range is as follows: LSM-500S : ø5 µm to ø1.6 mm LSM-501S : ø50 µm to ø2 mm Note 2: For calibration, the calibration gage set for LSM-500S ( 02AGD110 ) is required.
Got Questions?
G-40
Powered by FlippingBook