Laser Scan Micrometer
• Multi-function display for LSM500S series. • Capable of statistical analysis such as: average, maximum value, minimum value, range (max. to min.). • Segment measurement (7 points) or edge measurement (1 to 255 edges) can be selected. • A function to eliminate abnormal values is standard. • 100 tolerance values, preset values, or settings can be stored. • Multiple communication formats are available LSM-6200 Display Unit SERIES 544 — Multi-function Type
DIMENSIONS
Unit: mm
335
統計葦字
シフト 測定 連続測定
設定
葦字
PROG.
1 2 3 4 5 6 7 8 9
読込み
C
合否判定
H.CAL
マスタリング
L.CAL
CAL
キーロック
オフセット 統計処理 同時測定
オフセット
0
＋ / －
基準値
●
LD1 ON
BUSY
-NG
GO +NG
RUN
統計表示
全メモリクリア キーロック 単位 メモリクリア
LD2 ON
入力
統計処理
SPECIFICATIONS Model
LSM-6200 544-072A
Order No.
Type
inch/mm
Display
16-digit dot matrix (upper) and 11-digit 7-segment (lower) 1 to 7 (1 to 3, transparent) or 1 to 255 edges* 1 Arithmetic average: per 2 to 2048/Moving average: per 32 to 2048 (Arithmetic average is per 16 to 2048 when using 544-532 ) Selection from "target value+tolerance", "lower tolerance + upper tolerance", or "7 classes multi-limit tolerance zone".
Segment
Averaging times
Judgment
Measurement mode Statistical analysis
Standby, Single measurement, Continuous measurement Maximum, Minimum, Average, Dispersion, (S.D)
Size
335 (W) ×134 (H) ×250 (D) mm
Optional Accessories • Serial cable (RS-232C null): 12AAA807 • Footswitch: 937179T • Extension Signal Cables: 02AGN780A, B, C, D • Digimatic output card: 02AGC840 • Dual Input Card: 02AGP150 • BCD output: 02AGC910 • 2nd analog output card: 02AGC880 • Printer: 02AGD600B
Power supply Standard I/F Optional I/F
100 to 240 V AC ±10%, 45 W, 50/60 Hz
RS-232C, Analog I/O
Digimatic code output unit (2-ch), 2nd I/O analog I/F, BCD I/F
Operating environment
0 to +40 °C, RH 35 to 85% (non-condensing)
Nominal setting, sample setting, selection of unnecessary digits, transparent object measurement* 2 , measurement of odd fluted parts, automatic measurement in edge mode, output timer, abnormal data elimination, SHL change, group judgment, simultaneous measurement, statistical processing, mastering, buzzer function, automatic workpiece detection (dimension/position)* 1 , zero-set/offset, dual measurement (optional)
Other functions
G
LSM-5200 Display Unit SERIES 544 — Panel-mount Type
DIMENSIONS
Unit: mm
• A compact controller which could be used for multi-unit system configurations. • A panel-mount type display unit designed for the LSM500S Series. • Analog I/O and RS-232C is standard.
144
197.1
(20.5)
SPECIFICATIONS Model
LSM-5200
Side view
Front view
Order No.
544-047 (power supply not included) 9-digit (upper) and 8-digit (lower) 7-segment 1 to 7 (1 to 3, transparent) or 1 to 255 edges
Display
Segment
Arithmetic average: from 4 to 2048; Moving average: from 32 to 2048 (Arithmetic average is from 16 to 2048 when using LSM-500S .) Selecting from "target value±tolerance value" or "lower limit/upper limit".
Averaging method
138 (Aluminum case)
Judgment
Rear view
Measurement mode Statistical analysis External dimensions
Standby, Single measurement, Continuous measurement Calculation result is output via USB or RS-232C.
144 (W) ×72 (H) ×197.1 (D) mm 24 V DC±10%, 1.3 A or more USB2.0, RS-232C, I/O analog
Power supply Standard I/F
138 0 +1
140.4
Operating temperature (humidity) ranges Storage temperature (humidity) ranges
0 to 40 °C, RH 35 to 85% (non-condensing)
Support for mounting plate Bottom view t = panel thickness
Dimensions of panel mounting slot (DIN 43 700-144×76) Panel thickness: 1.6 ≤ t ≤ 6 (mm) Mass: 1.4 kg
−20 to 70 °C, RH 35 to 85% (non-condensing)
Measurement of odd fluted parts, simultaneous measurement, nominal setting, sample setting, selection of unnecessary digits, transparent object measurement Automatic workpiece detection (dimension/position detected)* 1 , abnormal data elimination, mastering, statistical processing (when using USB, RS-232C), output timer, automatic measurement in edge mode, presetting Note that every function is limited in its combination possibilities. See the user manual for details.
Other functions
Mass 1.4 kg Note 1: For USB communication with a PC, a dedicated device driver is required. For details, contact your nearest M³ Solution Center.
G-39
Powered by FlippingBook