Linear Gages
LG100 Standard Type Probe SERIES 542 — Environment-Resistant type
Connector
• IP67G protection rating with superior oil-resistance compared to standard gages. • All models have the origin point signal output function to restore the origin point position after recovery from problems such as overspeed. • When using any EJ+interface, a free setup and viewing software is available: LG Quicksetuptool (refer to page G-15) *1 10 mm range models (Actual value from in-house tests)
• High-accuracy gage head suitable for in-line and general use. • Guaranteed Accuracy and Repeatability. • Sliding durability of 50 million+ cycles* 1 . • Can be connected to various counters such as: - EJ series - built-in display, modular, compact, with PLC interfaces, as well as USB - EH series - high-visibility display, serial and I/O communication (adapter required) - or direct to machines via TTL output from the Linear Gage
Connecting cable (2 m)
ø14.7
HR10A-10P-10P (HIROSE)
Unit: mm
Optional Accessories • Air lifter
For 10 mm range models: 02ADE230 For 25 mm range models: 02ADE250 For 50 mm range models: 02ADE270 Note 1: Required air pressure: 0.2 to 0.4 MPa (With a 0.1 µm resolution type: 0.2 MPa) Note 2: Spindle extends when air is supplied.
542-190
542-193
542-196
Enables real-time measurement and data management
Counter Industrial interface
• Rubber boot (spare) For 10 mm range models: 21HAA331 For 25 mm range models: 21HZA176 For 50 mm range models: 21HZA184 Note 3: Dimensions are shown in the external dimensions drawing of the product. • Thrust stem set: For 10 mm range models: 02ADB680 (Thrust stem: 02ADB681 , Clamp nut: 02ADB682 ) For 25/50 mm range models: 02ADN370 (Thrust stem: 02ADN371 , Clamp nut: 02ADB692 ) This is a combination of thrust stem and a clamp nut. • Spanner wrench: If required spanner wrench is required for tightening. If using multiple gages, a thrust stem set is required for each gage and one spanner wrench. • Extension cable 5 m: 21HZA197 10 m: 21HZA198 20 m: 21HZA199 Note 4: Connectable up to 3 pieces, 20 m at maximum. • Conversion Plugs / Cables Plug connection to EH-101P/102P: 21HZA195 Plug connection to EH-102Z: 21HZA196 Cable connection to EH-101P/102P: 21HZA260 Cable connection to EH-102Z: 21HZA261 Note: Connectable to EH-102Z but the function of reference point detection is disabled. For 10 mm range models: 02ADB683 For 25/50 mm range models: 02ADB693
G
Measurement
PLC
Data management
System Configuration
Compact-type counter EJ Series* 3
RS-232C / USB* 1
USB
PC
Industrial IF/IO
2-phase square wave
RS-232
PLC
LG100 Series
Multi-functional counter EH counter* 2
（ 50 ）
*1 USB output of EH counter is specifically for SENSORPAK . *2 A conversion plug is required for connecting to EH counter. *3 Conventional gages can be connected using conversion connectors. (Please contact us for details of connectable gages.)
21HZA195 (Standard type)
（ 48 ）
21HZA196 (With origin point mark)
G-5
Powered by FlippingBook