Stands
SERIES 215 — Cast Iron Base Comparator Stands • Comparator Stands are designed for comparison measurements of size using a dial indicator or Digimatic Indicator. • The partially serrated anvil prevents very flat workpieces from wringing to it.
Example of attaching the Digimatic Indicator
215-405-10
Digimatic Indicator ID-H .
SPECIFICATIONS Order No.
Clamping range on column (mm)
Micromotion mechanism (Adjustment range) Vertical fine adjustment (1 mm)
Anvil
Stem hole
Optional Accessories ø15 mm bushing (for 215-156-10 , 215-505-10 ): 21JAA331
Square semi-serrated anvil (110×110 mm) Square semi-serrated anvil (150×150 mm)
ø0.375 in, ø8 mm with Bushing
215-405-10
0 to 235
F
ø20 mm, ø0.375 in with Bushing, ø8 mm with Bushing
215-505-10
0 to 275
Micromotion screw
Note 1: Perpendicularity of the stem hole to the anvil is better than 0.4 mm/100 mm. Note 2: Take note that when mounting high-accuracy Linear Gages (with resolution of 0.1 μm or better) to these stands, accuracy may be affected depending on the perpendicularity of the mounting hole to the top surface of the anvil (cosine effect). Note 3: Compact dial indicators (bezel ø31, ø36) are not suitable for use with these stands.
DIMENSIONS
Unit: mm
ø40
95
Fine adjustment
Column clamp
Stem hole without Bush ø0.375 in with Bush ø8
Indicator clamp
Anvil Flatness: 2.3 µm or better
110
201
134
215-405-10 • Clamping range on column: 0 to 235 mm
ø50
115
Column clamp
Stem hole without Bush ø20 with Bush ø0.375 in with Bush ø8 Anvil Flatness: 2.3 µm or better
Indicator clamp
150
255
179
215-505-10 • Clamping range on column: 0 to 275 mm
Got Questions?
F-107
Powered by FlippingBook