Stands
Dial Gage Stands SERIES 7 • Dial Gage Stands are designed for comparison measurements of size using a dial indicator or Digimatic Indicator. An anvil is provided as standard. • Anvil: 90 mm serrated flat anvil. • Vertical fine adjustment is available with one- touch control thanks to the parallel spring suspension.
7007-10 (with 90 mm square semi-serrated anvil)
SPECIFICATIONS Inch/Metric Order No.
Clamping range on column (mm)
Stem hole
Remarks
7007-10
0 to 90
ø8 mm, ø0.375 in
With square anvil
Note 1: Perpendicularity of the stem hole to the anvil is better than 0.4 mm/100 mm Note 2: Take note that when mounting high-accuracy Linear Gages (with resolution of 0.1 μm or better) to these stands, accuracy may be affected depending on the perpendicularity of the mounting hole to the top surface of the anvil (cosine effect). Note 3: Compact dial indicators (bezel ø31, ø36) are not suitable for use with these stands.
DIMENSIONS
Unit: mm
F
ø30
80
Column clamp
Fine adjustment
Stem hole
with Bush: ø8 without Bush: ø0.375 in
Anvil Flatness: 1.3 µm
Indicator clamp
90
or better
168
110
7007-10 • Clamping range on column: 0 to 90 mm • Flatness of reference surface: 1.3 μm
SERIES 913 • Simple standard version. • Serrated flat anvil. • For ø8 mm stems only. • ø22 mm Column diameter. • Optional holder for cylindrical parts.
Optional Accessories 913-201
Horizontal holder
913-102
SPECIFICATIONS Metric Order No.
913-201
Effective table dimensions (mm)
Clamping range on column (mm)
Stem hole
913-102
60 X 70
ø8 mm 0 to 100
F-105
Powered by FlippingBook