Indicator Calibration
i-Checker IC2000 SERIES 170
• The i-Checker makes it easier to continuously perform high-accuracy inspection of various indicators. • A wide variety of optional accessories enable the inspection and calibration of many types of gages including dial indicators, lever-type dial indicators, dial test indicators, bore gages, Digimatic indicators, linear gages and lever
• Can directly inspect indicators with a stroke of up to 4 in/100 mm. • The pointer of the analog indicator is positioned just before the measuring point automatically in the semi-automatic mode. • Digital indicators equipped with a data output function are checked very efficiently due to spindle positioning at the inspection points and recording of measurement results being under fully automatic control.
Functions Semi-automatic inspection of analog indicator The pointer of the analog indicator is positioned just before the measuring point automatically via Mitutoyo’s
Semi-automatic Measurement function. After that, inspection begins simply by adjusting the pointer position with the jog- dial. Because of this function, measurement time is reduced and user fatigue is practi- cally eliminated. Additionally all functions necessary for inspection are combined in the control box so that the operator need not rely on excessive eye movement to adjust the pointer.
gage heads that use various stem diameters and support systems.
1. Press of data button Inputs the current position data and moves spindle just before the next measurement position automatically.
IC2000
Automatic transfer
2. Positioning by Jog-dial 3. Press of data button Inputs the current position data and moves spindle just before the next measurement position automatically. Note: It is possible to specify the scale graduation increment so that spindle movement and data transfer are performed automatically.
Automatic transfer
SPECIFICATIONS Order No.
Optional Accessories 02ASK000 : Test indicator attachment set (ø6mm stem) 02ASK180 : Test indicator attachment set (ø8mm stem) 02ASK370 : Test indicator holder (ø6mm stem) 02ASK380 : Test indicator holder (ø8mm stem) 02ASU162 : CG accessory set (type C) for bore gages* 21CZB128 : ø6mm dovetail grooved stem 21CZB129 : ø8mm dovetail grooved stem 02ASK040 : Stem bushing ø6mm 02ASJ856 : Stem bushing ø8mm 02ASK150 : Stem bushing ø8mm, short 02ASL150 : Stem bushing ø10, short 02ASK050 : Bushing ø9.5 (Requires 02ASK070 ) Fully automatic inspection of digital indicator The Automatic Measurement function, in tandem with a digital indicator, makes the spindle move so that measurement data is acquired automatically. Therefore, manual adjustment to the measurement position is unnecessary and the efficiency of every inspection is enhanced. Create and printout a simplified inspection certificate Create, edit and print your own inspection certificate. Data can be saved as a CSV file.
64PKA148A 4 in/100 mm 0.4 μin/0.01 μm
F
Measuring Range
Resolution Accuracy (20 °C) Feed speed
vertical orientation lateral orientation
(0.1 + 0.4L/100) μm L=Arbitrary length (mm) (0.15 + 0.6L/100) μm L=Arbitrary length (mm)
Maximum 10 mm/s
Drive method Measuring Unit
Motor drive (semi-automatic/fully-automatic)
Separate type Linear Encoder
Semi-automatic measurement Fully automatic measurement (only when using an indicator equipped with data output function)* 1 * 2
Measurement method
Mass
20 kg
Operating temperature
20 °C±0.5 °C
Remarks with 8 mm bushing and 3/8 in bushing *1 Automatic measurement requires the indicator’s connection cable. Additionally some form of indicator, along with the normally connected accessory (the optional accessory for the indicator such as a Digimatic power-supply unit in an EF counter) will be required. *2 The indicator measured via RS-232C has the capability to receive data from the main unit and output the counter value. Recommended PC Part No. PMICPU003 (PC) & PMIMON003 (monitor)
DIMENSIONS
Unit: mm
02ASK060 : Stem bushing ø12mm 02ASK070 : Stem bushing ø15mm 02ASK080 : Stem bushing ø20mm 02ASK710 : Stem bushing ø28mm 02ASK090 : Stem bushing 3/8” 02ASK130 : Stem bushing case 02ASK730 : Reflector 937179T : Foot switch
Dial Indicators
Dial Test Indicators
ø8 mm/ø9.525 mm (3/8 in), Standard accessory
73 79.5
ø160
* Not compatible with IC1000 models
Digimatic Indicators
Linear gages
Product catalog E12015
Video
ø200
164
Bore Gages
Lever gage heads
F-87
Powered by FlippingBook