Digimatic Mini-Processor DP-1VA
SERIES 264 ̶
DP-1VA Data Collection • A gage with SPC output is connected to the DP-1VA with an SPC cable. • The data for each part measured is printed or sent directly to a PC through a USB cable. • This data can be triggered by the button on the gage, cable or the DP-1VA. An optional footswitch can also be used. Data Logger: – Data can be stored internally, printed and/or sent to a PC as it is measured or after all data has been collected. – Up to 1,000 measurements can be stored. Timer:
A
USB connection allows collected data to be easily transferred from the DP-1VA to the PC. The output is HID or VCP so data can be sent directly to Excel or data collection software such as IT-Pak or MeasurLink ® .
– Data collection can be triggered by a timer function. The DP-1VA can collect data unattended to measure changes over time. Tolerance and SPC: – Tolerances can be set in the unit and statistics can be calculated and printed directly from the DP-1VA. – No additional software is required.
Digimatic 2 function allows the high resolution of the gage to be output in its entirety in metric or inch.
264-506A
Standard Accessory 06AEG302JA: AC Adapter
SPECIFICATIONS
Order No. Data input
264-506A
Optional Accessories 09EAA084* : RS-232C changing cable (1m, 9pin) 965516* : GO/±NG judgment cable 937179T : Foot switch 09EAA082 : (10 rolls) *It is impossible to use the both RS-232C cable and GO/±NG judgment cable at the same time.
Digimatic, Digimatic 2, RS-232C input (for KA Counter Only)
Printing method
Thermal line printer
Character specifications
Total dot number: 384 dots/line Dot size: 8 dots/mm
Normal font: 24 x 16 dots Large font: 36 x 24 dots
Print speed Print capacity
0.8 s/line when using AC adapter 7,000 lines/roll with Large font 10,000 lines/roll with Normal font
■ USB cable (A-microB) (optional) 06AFZ050
Print data
Measuring data, Go/±No-go, number of data, maximum minimum value, range, average, standard deviation, number of defective, function defective, process capability index, histogram, D-chart, control chart generation for X-bar and central limit data, data and time
Printer paper
High durability thermal paper. (one roll included) Width: 58mm. Roll length: 48m
Power supply
100 V 50/60 Hz AC adapter (6 V, 2 A) AA alkaline batteries x4 (not included)
Battery life
About 10,000 lines at 20 C
■ Foot switch (optional) 937179T
Data processing capability
Mode 0: 100,000 data entries Mode 1, 2: 9,999 data entries Mode 3: sample size 10 x subgroup 9,999 = Total number of data entries: 99,990
Tolerance judgement 5 sets Logging of measurement data Max 1,000 points Timer input
0.25 s, 1 s, 5 s, 30 s, 1 min, 30 min, 60 min USB output RS-232C output at TTL level Tolerance judgment result output (-NG, GO, +NG)
Data output
Clock precision
+/-2 min max/month
Internal battery life 10 years Operating temperature range 0 C to 45 C with AC adapter 10 C to 45 C with batteries External Dimensions 94mm x 201mm x 75mm
"d2" is the name for Mitutoyo Digimatic output compatible with up to 8 digits of I/O data.
A-26
Powered by FlippingBook