Dial Test Indicators
Optional Accessories for Pocket Type Dial Test Indicators Contact point (for Metric Models Only)
• Contact Point effective length, L2, must match what is currently mounted on the indicator. Effective length is printed on the dial face.
pocket type dial test indicator
L2
2 mm
Contact point (for Inch Models Only)
øD contact point
M1.7×0.35
pocket type dial test indicator
L2
2 mm
Swivel Clamps
ø0.7 mm contact point (Steel)
ø0.5 mm contact point (Steel)
For 0.157 inch DIA. stem and 0.375 inch DIA. stem, and dovetail
øD contact point
M1.7×0.35
ø1 mm contact point (Carbide)
ø2 mm contact point (Carbide)
ø2 mm contact point (Carbide) 190548 (L2=11.2 mm) 190550 (L2=17.4 mm) 190655 (L2=41.0 mm) ø3 mm contact point (Carbide) 136104 (L2=8.6 mm) 103010 (L2=11.2 mm) 103006 (L2=17.4 mm) 129949 (L2=33.3 mm) 136013 (L2=41.0 mm)
ø1 mm contact point (Carbide) 190547 (L2=11.2 mm) 190549 (L2=17.4 mm) 190656 (L2=41.0 mm) 136756 (L2=8.6 mm) 103017 (L2=11.2 mm) 103013 (L2=17.4 mm) 137746 (L2=33.3 mm) 136235 (L2=41.0 mm) ø2 mm contact point (Ruby)
103011 (L2=.60") 103007 (L2=.91") 131324 (L2=1.34")
131314 (L2=.60") 103008 (L2=.91") 131316 (L2=1.34")
900322
For ø6 mm stem, ø8 mm stem, and dovetail
For ø4 mm stem and ø8 mm stem, and dovetail
ø3 mm contact point (Carbide)
F
131315 (L2=.60") 103009 (L2=.91") 131317 (L2=1.34")
900321
902053
136758 (L2=8.6 mm) 103018 (L2=11.2 mm) 103014 (L2=17.4 mm) 137747 (L2=33.3 mm) 136236 (L2=41.0 mm)
21CZA209 (L2=11.2 mm) 21CZA201 (L2=17.4 mm) 21CZA211 (L2=41.0 mm)
Unit: mm
ø18
Universal Holder (screw clamp) • A universal holder is an attachment used to mount a dial test indicator in a machine tool spindle so that it can be used to align the spindle axis with a workpiece feature such as a hole center, or a machine axis with an edge. (See diagram below.) It also gives some protection against accidental impacts on the indicator.
ø6
Order No. d1 d2 902053 6 8 900321 4 8 900322 0.157 in 0.375 in
Spanner
ød1 5.8
ød2
• Used for tightening or removing the mounting stem for Pocket Type Test Indicators
16.2
27.5
301336
Holding Bars
ø6
21CZA232 (0.25 inch DIA. stem) 21CZA234 (ø8 mm stem) 21CZA230 (ø6 mm stem)
Stems 5/32" DIA. ø4 mm
5/16" DIA. ø8 mm
3/8" DIA.
0.25×0.5 in
953639* (Length: 2 in) 900306* (Length: 4 in)
Unit: mm
ø15
M7.4×0.5
ø6
9×9 mm
900209 (Length: 100 mm)
ø6
102036
102822
102081
ø8 mm (0.315 inch DIA) 900211 (Length: 115 mm)
ø6 0
-0.03
60°
*Suitable for height gages with a scriber section of 12.7×6.35 mm.
F-86
Powered by FlippingBook