MAC CAT-1006 FINAL

Dial Test Indicators

• This test indicator series is slimmer than standard test indicators without a clutch lever, making it more suitable for measuring deep points. • Contact point length is printed on dial face to avoid accuracy issues. Note 1: Attaching a contact point of incorrect length will lead to measurement failure. • Glare-free flat crystal face allows easy reading of graduations. Multi-layer composite coatings make the crystal more anti-reflective and stain resistant. Pocket Type Dial Test Indicator SERIES 513

• Bonding the bezel and crystal together leaves no gap for cutting fluid or oil to penetrate through to the dial face. (Note that this type is NOT water-proof.) • Clutch type (with a clutch lever) Note 2: See page F-83 for notes on differences with models that do not have a clutch lever. • A ø2 mm carbide contact point is supplied as standard.

Set Configuration: Inch

Full set

513-5XX-10T

Inch holding bar (L: 4 in)

Swivel clamp ( 900322 , for 0.157 inch DIA. stem, 0.375 inch DIA. stem, and dovetail)

Holding bar

Stem, 0.157 inch DIA.

0.118 inch DIA. contact point (carbide)

0.039 inch DIA. contact point (carbide)

Basic set

513-5XX-10E

513-517-10E/ 513-517-10T

Stem, 0.375 inch DIA.

Standard Compact Carbide contact point

Spanner

Graduation: 0.01 mm Range: 0.8 mm

513-5XX-10 is indicated on the dial face.

F

513-515-10E/ 513-515-10T

Long contact point Compact Carbide contact point

Graduation: 0.01 mm Range: 1 mm

Set Configuration: Metric

Full set

513-5XX-10T

513-501-10E/ 513-501-10T

High accuracy Compact Carbide contact point

Swivel clamp ( 900321 , for ø4 mm stem, ø8 mm stem, and dovetail)

Metric holding bar (L: 100 mm)

Graduation: 0.001 mm Range: 0.14 mm

Stem, ø4 mm

513-514-10E/ 513-514-10T

Holding bar

Long contact point Double scale spacing Compact Carbide contact point

Basic set

513-5XX-10E

Stem, ø8 mm

Graduation: 0.01 mm Range: 0.5 mm

Spanner

513-503-10E/ 513-503-10T

513-5XX-10 is indicated on the dial face.

Standard Compact Carbide contact point

Graduation: 0.002 mm Range: 0.2 mm

F-81

Powered by