Dial Test Indicators
Set Configuration: Inch
With revolution counter
Long contact point
Carbide contact point
Full set
SPECIFICATIONS Inch
513-4XX-1XT
Standard (20° tilted face) type
Order No.
Accuracy (in)
Graduation (in)
Dial reading
Mass (g)
Measuring force (N)
Range (in)
Swivel clamp ( 900322 , for 0.157 inch DIA. stem, 0.375 inch DIA. stem, and dovetail)
Hysteresis Repeatability
Remarks
Basic set Plus set
Full set
One rev. First 2.5 rev.
Inch holding bar (L: 4 in)
— 513-442-10A 513-442-10T — 513-442-16A 513-442-16T — 513-446-10A 513-446-10T — 513-446-16A 513-446-16T — 513-443-10A 513-443-10T — 513-443-16A 513-443-16T
0.3 or less 4 4
0.3 or less 4 4 Black dial
0.0005 0.06 0-15-0 ±0.0005 ±0.0005 0.0002 ±0.0002 48
0.2 or less 4 4 4
Plus set
513-4XX-1XA
0.2 or less 4 4 4 Black dial
0.3 or less 4 4
0.0001 0.016 0-4-0 ±0.0002 ±0.0002 0.0001 ±0.00004
0.3 or less 4 4 Black dial
Stem, 0.157 inch DIA.
0.118 inch DIA. contact point (carbide)
0.039 inch DIA. contact point (carbide)
Metric
Standard (20° tilted face) type
Order No.
Accuracy (μm)
Graduation (mm)
Dial reading
Mass (g)
Measuring force (N)
Range (mm)
Hysteresis Repeatability 10 scale divisions 513-444-10E 513-444-10A 513-444-10T 0.01 1.6 0-40-0 16 10 5 5 3 Basic set Plus set Full set Measuring range One rev. 513-445-10E 513-445-10A 513-445-10T 0.0020.40-100-0 6 52 4 1
Remarks
4 4 4 4
48 0.3 or less
Basic set
513-4XX-10E
Inch
Vertical type
Order No.
Accuracy (in)
Graduation (in)
Dial reading
Mass (g)
Measuring force (N) 0.3 or less 0.3 or less
Range (in)
Hysteresis Repeatability
Remarks
Basic set Plus set One rev. First 2.5 rev. 513-452-10E — 513-452-10T 0.0005 0.03 0-15-0 ±0.0005 — 0.0002 ±0.0002 46 Full set 513-453-10E — 513-453-10T 0.0001 0.008 0-4-0 ±0.0001 — 0.0001 ±0.00004
Knurled clamp ring
Stem, 0.375 inch DIA.
4 4
Metric
Vertical type
513-4XX-1X is indicated on the dial face.
Order No.
Accuracy (μm)
Graduation (mm)
Measuring force (N)
Range (mm)
Dial reading
Mass (g)
Hysteresis Repeatability
Remarks
One rev.
10 scale divisions
Measuring range
Basic set Plus set
Full set
F
513-456-10E — — 513-454-10E 513-454-10A 513-454-10T
0.5 0-25-0 6 — 0.8 0-40-0 9 —
4 4 4
5 4 3
0.01
46 0.3 or less
0.079 inch DIA. contact point (carbide)
513-455-10E 513-455-10A 513-455-10T 0.002 0.2 0-100-0 4 — 2 3 1
Inch
Horizontal Type
Indicator
Order No.
Accuracy (in)
Graduation (in)
Dial reading
Mass (g)
Measuring force (N)
Range (in)
Hysteresis Repeatability
Remarks
Basic set Plus set One rev. First 2.5 rev. — 513-482-10A 513-482-10T 0.0005 0.03 0-15-0 ±0.0005 — 0.0002 ±0.0002 53 0.3 or less Full set
Set Configuration: Metric Full set
4
Metric
Horizontal Type
513-4XX-10T
Order No.
Accuracy (μm)
Graduation (mm)
Dial reading
Mass (g)
Measuring force (N)
Range (mm)
Hysteresis Repeatability
Remarks
One rev.
10 scale divisions
Measuring range
Basic set Plus set
Full set
513-486-10E — — 513-484-10E 513-484-10A 513-484-10T 513-485-10E — —
0.5 0-25-0 6 — 0.8 0-40-0 9 —
4 4 4
Swivel clamp ( 900321 , for ø4 mm stem, ø8 mm stem, and dovetail)
5 4 3
0.01
53 0.3 or less
Metric holding bar (L: 100 mm)
0.002 0.2 0-100-0 4 — 2 3 1
Plus set
513-4XX-10A
DIMENSIONS
Standard (20° Tilted Face) Type
Unit: mm
ø3 mm contact point (carbide)
ø1 mm contact point (carbide)
Stem, ø4 mm
L1
55.7
L2
Vertical Type
Order No. L1 L2 513-445-10E 18.7 15.2 513-444-10E 20.9 17.4
Basic set
513-4XX-10E
ø40
17.6
Knurled clamp ring Stem, ø8 mm
59.7
24.1
17.6
Horizontal Type
24.1
513-4XX-10 is indicated on the dial face.
20.4
7
17.6
Order No. L1 L2 513-484-10E 20.9 17.4 513-485-10E 18.7 15.2 513-486-10E 22.2 18.7
Order No. L1 L2 513-454-10E 20.9 17.4 513-455-10E 18.7 15.2 513-456-10E 22.2 18.7
72.1
24.1
ø2 mm contact point (carbide)
ø40
Indicator
L2
22.3
45.9
L1
Note: A slight difference may occur depending on the center of the contact point, graduation plate, and stem fixing position, etc.
F-79
Powered by FlippingBook