Multi-Gage Interface Unit Multiplexers
USB Multiplexers
• The ability to transfer data from the gage into any software such as Excel or MeasurLink ® • Simplifying multi-gage inspection stations to a single USB connection reduces the number of connections required to the PC • Supports keyboard emulation (HID), Virtual COM Port (VCP) and RS232 connections
• MAX, MIN and TIR collection modes for a single gage or across all connected gages • Data input from Digimatic, d2, and RS-232 devices • Timed and continuous data streaming • Map ports to specified spreadsheet columns or rows for organized data collection • Date and timestamp for spreadsheets
Technical Data Data output: Via RS-232C interface / USB
A
Default Configuration Data length: 8 bits Start bit: 1 bit Stop bit: 1 bit
Parity check: None Baud rate: 9600
SPECIFICATIONS
Standard Accessory 06AEG302JA :
MIG Input
MIG Output
Power
AC Adapter RS232C: Cable (1.5m / 5ft) USB Cable
# of Inputs
10-pin Digimatic
Pass-Thru Port
Supplies Power**
Model No. Order No. MIG-1USB 64AAB637 MIG-2USB 64AAB638 MIG-4USB 64AAB639 MIG-8USB 64AAB640
Serial RS232
USB
RS232 Power Supply
1 2 4 8
Y
-
-
HID/VCP
-
from USB port
-
Y RS232 DB9M Y HID/VCP RS232 DB9F Power Adapter Y RS232 DB9M Y HID/VCP RS232 DB9F Power Adapter Y RS232 DB9M Y HID/VCP RS232 DB9F Power Adapter
Y Y Y
Optional Accessories 937179T : Foot switch
All MIG units include USB cable, RS-232C cable*, AC adapter*, and USB flash drive with additional drivers. * MIG-1USB does not include RS-232C cable or AC adapter. Power is supplied by USB. **MIG interfaces can have a feature where power can be supplied to gages or converter cables that can accept it, such as: 64PMT114, LGS Linear Gages, etc.
RS-232C (ASCII code)
MIG-8USB MIG-4USB
PC
Digimatic output
Push button switch Available on MIG-1 USB Multiplexers. Used to trigger data or start and stop MAX, MIN, TIR data collection
Toggle switch Available on MIG-2 & 4 USB Multiplexers. Used to trigger data or start and stop MAX, MIN, TIR data collection
Trigger Port Available on MIG-1, 2, 4, & 8. Used to trigger data or start and stop MAX, MIN, TIR data collection with an external trigger. Can be used to trigger all data ports
10-pin Digimatic port and LED indicator Available on MIG-1, 2, 4, & 8. LED verifies data input and MAX, MIN & TIR data collection 10-pin port accepts data from any Mitutoyo Digimatic tool with an SPC cable
PC
Command
Measurement data
Rear View
MIG-8USB MIG-4USB
Foot switch
Digimatic output
w
r
MIG-4USB
q
e
MIG-1USB
MIG-2USB
MIG-8USB
A-25
Powered by FlippingBook