Dial Indicators
Selection table for various back covers
• If the back cover of water-proof model is replaced, the water resistance will not be guaranteed. • When mounting a back cover to lightweight type Series ( 297*AB ), separately prepare 4 fixing screws ( 546666 Self-tapping screw only for plastic). Do not apply a tightening torque of more than 20 N · cm in order to avoid stripping the screw threads.
Dial Indicators Inch
Series 1
Series 2
Series 3 & 4
2.24 in (W/D proof models)
2.19 in (W/D proof models)
1.57 in (W/D proof models)
2.19/2.24 in
3.07/3.62 in
Bezel diameter
1.22 in 1.57 in
Lug-on-Center Back 190139 101307 101307
101306
21BZB104 100797
191559 101211 136872
101039
192910 21AZB231 100836
Flat Back
900928 101167 101169
900929
Magnetic Back Back with Offset Lug Back with Post Back with Screw Mount
— —
— —
193172
—
Back Covers
101170 (#1/4-28UNF) 101168 (#1/4-20UNC)
—
—
129721 (#1/4-20UNC)
Adjustable Back
—
—
Back with Adjustable Bracket
901963
—
—
Metric
Series 1
Series 2
Series 3 & 4
55.6 mm (W/D proof models)
40 mm (W/D proof models)
57 mm (W/D proof models)
Bezel diameter
31 mm 36 mm 40 mm
55.6/57 mm
78/92 mm
F
Lug-on-Center Back 190561 137905 101210 101210
101040
21AZB230 100691
191559 137906 101211 136872 101039 192910 21AZB231 100836
Flat Back
900928 101167 101169 136023 (M6×1) 136026 (M6×1)
900929
Magnetic Back
— —
Back with Offset Lug Back with Post Back with Screw Mount
— —
193172 193173 (M6×1) 136025 (M6×1)
—
Back Covers
—
—
Adjustable Back
—
—
Back with Adjustable Bracket
901963
—
—
Digimatic Indicators
(0.5" models) ID-F Series ID-C Series ID-S Series
ID-C Series ID-S Series (Waterproof type)
(1" & 2" models) ID-F Series ID-C Series
Current Series/ model
Type
ISO/JIS
ANSI /AGD 101306
ISO/JIS 101040
ANSI /AGD
ISO/JIS
ANSI /AGD
101040
101306
21AZB230 21BZB104
Lug-on-Center Back
101039
21AZB231
Flat Back
—
900928 101167 101169
Magnetic Back Back with Offset Lug Back with Post Back with Screw Mount
Back Covers
136023 (M6×1) 136026 (M6×1)
101170 (#1/4-28UNF) 101168 (#1/4-20UNC)
136023 (M6×1) 136026 (M6×1)
101170 (#1/4-28UNF) 101168 (#1/4-20UNC)
136023 (M6×1) 136026 (M6×1)
101170 (#1/4-28UNF) 101168 (#1/4-20UNC)
Adjustable Back
Back with Adjustable Bracket
901963 * For the ID-CNX , ID-FNX Series (25.4, 50.8 mm/1, 2 inch models), attach the back covers as shown to the left.
F-70
Powered by FlippingBook