Dial Indicators
Optional Accessories for Digimatic and Dial Indicators and Linear Gages Lever Point
Suitable for use* on perpendicular faces, such as those within mold cavities. Lever can be adjusted to the required angle. * Perform measurement in the same posture and conditions as for the reference setting so that variation due to lever deflection is reduced. Gently bring the contact point into touch with the workpiece. Use a dial indicator with as small a measuring force as possible.
Unit: mm
(42.2)
(34.7) Unit: mm
7.5
(42.2)
A: 4-48UNF
26.3
2
7.5
(34.7)
6.5
26.3
2
Order No. 900393 A: M2.5×0.45 Order No. 900391
6.5
900391
A
M1.4×0.3
(11)
A
ø3 carbide tipped
M1.4×0.3
(11)
ø3 carbide tipped
F
The tip of contact point is interchangeable. Interchangeable contact points (optional) Tip of contact point
ø1 mm contact point: 102824 ø2 mm contact point: 102825 ø3 mm contact point: 102826 (provided as standard)
Tip of contact point
Roller Point Suitable for use on a moving workpiece surface, or where the workpiece needs to slide from the side.
A: 4-48UNF
Unit: mm
A Hex-nut
Order No. 901991 A: M2.5×0.45 Order No. 901954
901954
3 9 10
R5
ø10
Roller material: Hardened steel Roller runout: 10 μm or better
Note 1: For a different roller diameter, contact your nearest M³ Solution Center. Note 2: High-accuracy roller with 5 μm runout is also available. (Special order item)
Talk to Sales
F-67
Powered by FlippingBook