Single Gage Data Collection Device USB and RS-232 Input Tool
Measurement Data Input Tool Input Tool SERIES IT-020U/IT-007R
Main Specifications of 264-020 Output specification: USB2.0 or USB1.0 Supported driver software: Changeable between two types 1) Stand-alone: HID keyboard device* 2) Using USB-ITPAK V3.0 / MeasurLink ® : Virtual COM port (VCP) Communication speed: 12 Mbps (Full Speed) Power source: USB bus power USB2.0 certificate Conforms to EMC Directive * This product is compatible with the standard driver software for Windows. No dedicated driver software is required.
• 264-020 ( IT-020U ) is an easy-to-use, expandable USB input tool with a large data switch and a foot switch connector. 264-007 ( IT-007R ) is an RS-232C communication-type input tool that can be controlled by data request commands from a PC.
• It can be connected to various types of measuring instruments using required SPC cables.(refer to pages A-29 to A-30) • When using with optional software (refer to page A-11), you can easily create Microsoft Excel worksheets, enabling further improvement of work efficiency.
A
264-020
264-007
264-020/264-007 System Configuration
Switch box (optional)
Connection cable
Digimatic gages
Input tool
PC
Foot Switch (optional)
Foot switch
264-020
C
Digimatic indicator
The Input Tool, an HID* keyboard device (standard driver software for Windows) is automatically recognized
B
Refer to pages A-29 and A-30 for details of Digimatic ports and connectors.
when connected to a USB port. * HID (Human Interface Device)
Digimatic caliper
Digimatic micrometer
Connect the Digimatic connector to the gage
Connect the unit to a USB port of the PC
Specifications of IT-007R RS-232C Communication • Output specification: RS-232C compliant
Connection port
USB keyboard signal conversion model Model: IT-020U 264-020
Connection cable
A B C D E F G SA SF
Communication method: Full duplex Communication speed: 2400 bps (fixed) Bit configuration: Start bit 1 Data length 8
USB socket (Type A)
Refer to pages A-29 to A-30 for details.
System Environment • Hardware: PC with USB socket (Type A) • Supporting OS ( USB-ITPAK V3.0 ): Windows 10 64 bit • Software: Programs supporting keyboard input (Excel, Word, memo pad, etc.) USB-ITPAK V3.0 (optional) Note: Information regarding USB-ITPAK V3.0 can be downloaded from our website.
(Most significant bit, 0 (fixed)) Parity, None Stop bit 1
1)
Flow control: None Home position: DCE (modem definition) • Data format D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 "0 1 A" (fixed) Signs, "+" or "–" Output order —> CR Data parts (Floating decimal point) 1) When data output
2)
Connector 9 types (A to G, SA and SF) +4 L types
Cable length: 1 m or 2 m
2) Error code output
Example of format Display Output data 0.123 —> 01A + 0000.123CR —> −0.1234 —> 01A − 000.1234CR
D1 D2 D3 D4 "9 1" (fixed) Error code No. 1: No data input CR
1)
2: Loaded data with format other than specified
• Data request signal Data can be output by transmitting a character from the PC. • Connector specification and power supply from the PC
This product operates while accumulating the power supplied from the PC. A second or more input interval is required.
⑤④③②① ⑨⑧⑦⑥ Pin No. Symbol in/out
Foot switch (optional) 937179T
RS-232C communication conversion type Model: IT-007R 264-007
Serial port
Connect the unit to a serial port of the PC
Description of functions
1 (N.C.) No connection 2 RXD OUT Data output from this product to the PC 3 TXD IN Data input from the PC to this product 4 DTR IN +12 V power supply from the PC* 5 GND — Ground 6 DSR OUT Not used 7 RTS IN +12 V power supply from the PC* 8 CTS OUT Not used 9 (N.C.) — No connection * When connecting to a sequencer, a power supply is required. — Input voltage: Supplied in the range 6 V to 16 V Power supply terminal: Supplied to pins 4 and 7 Note: "4" and "6", "7" and "8" are connected with each other inside this product.
D-sub 9 pin
Connection cable 2 m 2)
System Environment • Hardware: PC or sequencer with a serial port (D-sub 9 pin) • Software: A program compatible with the RS- 232C communication (such as a hyper terminal) is required.
2) 1)
This selector can connect up to 3 measuring gages and switching is available with the slide switches without changing connection cables. Connection cable (length: 1 m) between two input tools is a standard accessory ( 936937 ). Gage selector 3 (optional) 939039
Data output is available by transmitting data request commands from the PC.
A-24
Powered by FlippingBook