Dial Indicators
SERIES 2 — Special Dial Indicators Adjustable hand dial indicator • The hand position can be adjusted independently of the vertical movement of the spindle by rotating the top knob.
Optional Accessories • Limit hand (2 pcs.), Bezel clamp Refer to page F-27 for details.
2048A-10
SPECIFICATIONS Metric Order No.
Accuracy (µm)
Range (range / rev) (mm)
Graduation (mm)
Repeat- ability
Dial reading
Measuring force (N)
Hysteresis
Measuring range
w / lug Flat-back
1/10 Rev 1/2 Rev 1 Rev
2048A-10 2048AB-10 0.01
10 (1)
5
9
10
15
3
3 ±0-100 1.4 or less
DIMENSIONS
Unit: mm
ISO/JIS Type
E
D
I
F
5
ø6.5
ø8 0
-0.009
ø4.8
Ball contact (ø3) 21AZA319 (threaded: M2.5×0.45)
Mass (g) w / lug Flat-back
Order No.
A
B
C D
E
F
G H
I
2048A-10 135 Note: The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. When replacing it with an optional contact point with a connector not exceeding ø7 mm in outside diameter, insert a washer (with ø7 mm outside diameter, ø3 mm inside diameter, and approximately 0.5 mm thickness) above the contact point. 47.4 64.9 57 18.1 20 16.9 19.5 52 7.6 144
Continuous scale
Graduation: 0.01 mm, Measuring range: 10 mm
90 0 10
2048A-10
With coaxial revolution counter Adjustable hand Jeweled bearing
FEATURES Metric Order No.
90 0 10 w / lug Flat-back 2048A-10 2048AB-10 4 4 4 4
F-56
Powered by FlippingBook