Indicators
ABSOLUTE Digimatic Indicator ID-CAX SERIES 543 — Peak-Value Hold Type • The Peak Hold-Type Digimatic Indicator. GO/NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.*1 • Five buttons, status icons, and clear button indications allow easy operation and various functions. • Wide display and new analog bar graph are standard on all models. • The ABS (ABSOLUTE) scale restores the last origin position*2 automatically when the indicator is turned on, and realizes high reliability by eliminating over- speed errors. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to the A section) • By using the parameter setup kit (optional) and the dedicated software, the functions and the parameters
Functions • Peak detection (MAX/MIN) • Runout (MAX - MIN) Hold Note: Peak detection
1) Sampling rate: 50 readings/s 2) Capturing speed: 50 µm/s (max.)
• Zeroset (INC system) • Preset function (ABS system) • Measuring direction switching • Tolerance judgment (3 pairs of ABS, INC memory function) • Resolution selection • Simple calculation f(x) =Ax • Analog bar resolution selection • Key lock • in/mm conversion (inch/mm type) • Display hold (when no external device is connected) • Data output
• External PC setting input • Display rotation (330°) • Low battery voltage alarm display • Error alarm display
Optional Accessories Order No. Type
Description
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U
can be configured using a computer. *1 Tolerance judgment results cannot be output. *2 Refer to “Precautions for use” on page F-2.
264-020
—
543-302-10
F
905338 905409
F Connection cable (1 m) F Connection cable (2 m) F USB Input Tool Direct (2 m)
06AFM380F
Connection cable for U-WAVE-T (160 mm) Connection cable for U-WAVE-T For foot switch
02AZD790F
F
SPECIFICATIONS Inch/Metric
ASME/ANSI /AGD type
02AZE140F
F
Accuracy (in)
Battery life (normal use)
Mass (g)
Order No.
Range Resolution
Hysteresis Repeatability Measuring force (N)
IP67 U-WAVE-TM Buzzer U-WAVE-TM
264-622 264-623
0.00005/ 0.0001/ 0.0005 in, 0.001/ 0.01 mm (selectable)
543-302-10
195
Approx. 1 year
0.5 in/ 12.7 mm
U-WAVE-R
02AZD810D
—
±0.00010 0.00010 0.00010
1.5 or less
543-302B-10 (flat back)
IP67 U-WAVE-TMB Buzzer U-WAVE-TMB
264-626 264-627
170
U-WAVE-TM / TMB mounting bracket: for Digimatic Indicators
Inch/Metric
ISO/JIS Type
02AZF670
—
Repeatability R MPE
Accuracy (mm)
Hysteresis H MPE
Battery life (normal use)
Mass (g)
Order No.
Range Resolution
Measuring force (N)
0.00005/ 0.0001/ 0.0005 in, 0.001/ 0.01 mm (selectable)
• Lifting Lifting lever 21EZA198 Lifting knob 21EZA105 • Parameter setup kit: 21EZA313 Note: Parameter setting software (can be downloaded for free from the Mitutoyo website) is also required.
543-301-10
180
Approx. 1 year
0.5 in/ 12.7 mm
0.003
0.003
0.002
1.5 or less
543-301B-10 (flat back)
170
Metric
ISO/JIS Type Resolution (mm) 0.001 / 0.01 (selectable)
Repeatability R MPE
Range (mm)
Accuracy (mm)
Hysteresis H MPE
Battery life (normal use)
Mass (g)
Order No.
Measuring force (N)
543-300-10 543-300B-10 (flat back)
180 170
Approx. 1 year
12.7
0.003
0.003
0.002
1.5 or less
Parameter setup kit
Parameter setting software
• Power source: CR2032 battery (1 pc.), included as standard
• Contact points for Mitutoyo’s Digimatic indicators (optional)
Refer to pages F-63 to F-68 for details. • Interchangeable back covers (optional) Refer to pages F-69 to F-70 for details. • Measuring stands (optional) Refer to pages F-97 to F-103 for details.
F-13
Powered by FlippingBook