Indicators
ABSOLUTE Digimatic Indicator ID-N/B SERIES 543 — with Dust/Water Protection Conforming to IP66
Applicable models: 543-57X
Applicable models: 543-58X
• Slim body design (body width: only 35 mm). Rated to IP66: Can be used confidently even in adverse environments. • The ABS (ABSOLUTE) scale restores the last origin position* automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors. • Back plunger design (ID-B) is widely used for dial indicators. A 5 mm-stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement. • Tolerance judgment can be performed by setting upper and lower tolerance limits. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to the A section) * Refer to “Precautions for use” on page F-2.
Typical application
Functions • Zero-setting (INC system) • Presetting (ABS system) • Measuring direction switching • Tolerance judgment • Display readout reversal • Resolution switching (For 0.001 mm or 0.00005 in resolution type) • Data output • Display value holding (when no external device is connected) • Low battery voltage alarm display • Error alarm display
543-576
543-586
F
Slim type
Back Plunger type
SPECIFICATIONS Inch/Metric
Optional Accessories Order No. Type
ASME/ANSI/AGD Type
Range (in)
Description
Order No.
Resolution Accuracy (in)
Hysteresis
Repeatability Measuring force (N)
Remarks
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U
543-571 543-581
0.5 0.0005 in/ 0.01 mm 0.2
2.5 or less 2.0 or less
Slim type
264-020
—
±0.0010
0.0010
0.0005
Back Plunger type
0.00005/ 0.0005 in, 0.001/ 0.01 mm (selectable)
543-576
2.5 or less
Slim type
0.5
21EAA194
G Connection cable (1 m)
±0.00010
0.00010
0.00010
21EAA190
G Connection cable (2 m)
543-586
0.2
2.0 or less
Back Plunger type
06AFM380G
G USB Input Tool Direct (2 m)
Metric
ISO/JIS Type Resolution (mm)
Repeatability R MPE
Range (mm)
Accuracy (mm)
Hysteresis H MPE
Order No.
Measuring force (N)
Remarks
02AZD730G
U-WAVE-T
IP67
543-570 543-580 543-575 543-585
12.7 5.08
2.5 or less 2.0 or less 2.5 or less 2.0 or less
Slim type
02AZD880G Buzzer U-WAVE-T
0.01
0.02
0.02
0.01
Back Plunger type
12.7 0.001 / 0.01 (selectable) 5.08
Slim type
Connection cable for U-WAVE-T (160 mm) Connection cable for U-WAVE-T For foot switch
0.003 / 0.01 0.002
0.002
02AZD790G
G
Back Plunger type
• Power source: SR44 battery (1 pc.), 938882 included as standard
02AZE140G
G
264-622
U-WAVE-TM
IP67
264-623
Buzzer U-WAVE-TM
21EAA210 (1 m), 21EAA211 (2 m) Two of the wires inside the cable are separated for zero setting without touching the SET switch on the main body. Use these wires in combination with commercially available switches. Zero setting is performed by briefly connecting these two wires together (less than a second), and ABS preset & recall by connecting for a second or more. Bifurcated connection cable with zero-setting terminal (optional)
02AZD810D
U-WAVE-R
—
264-626
U-WAVE-TMB
IP67
264-627
Buzzer U-WAVE-TMB
02AZF675 U-WAVE-TM / TMB mounting bracket: for ID-N (Slim Type)* * Cannot be used with ID-B (Back Plunger Type) since it may apply stress to the cable. —
Bifurcated connection cable with zero-setting terminal
SPC cable
F-7
Powered by FlippingBook