Indicators
ABSOLUTE Digimatic Indicator ID-CNX (Digimatic S1 supported)
Functions • Peak detection (MAX/MIN) • Runout range measurement (MAX - MIN)
SERIES 543 — Standard Type • ID-C Series is a next-generation indicator with many new functions, supporting bidirectional communication. With the addition of the appropriate data cable and software, remote zero setting and gage setting can all be implemented from a connected PC, thereby improving your work efficiency. • The digital display and analog bar indications help you to intuitively read the approach to the origin and tolerance values. • The ABS (ABSOLUTE) scale restores the last origin position* automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.
• Zero-setting (INC system) • Presetting (ABS system) • Measuring direction switching
Measuring range 0.5 inch 543-702-02
Measuring range 1 inch 543-722B-02
• Tolerance judgment • Resolution switching (For 0.0005 mm or 0.00002 inch resolution type) • Simple calculation: f(x) =Ax • Function Lock • Calibration schedule warning • Auto power OFF • Data output • Display value holding (when no external device is connected) • 330° rotary display • Low battery/voltage alarm display • Error alarm display
• The next calibration due date can be set with an alarm to improve instrument management. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to the A section) * Refer to “Precautions for use” on page F-2.
Example of ID-CNX installed on optional bore gage
SPECIFICATIONS Inch/Metric
ASME/ANSI/AGD Type
Note: Direction setting, etc. is necessary when ID-CNX is used with a bore gage. Refer to the operation manual for details.
Order No.
Mass (g)
Measuring force (N) 1.5 or less 1.8 or less 2.3 or less 0.9 or less
Accuracy (mm)
Range
Resolution
Hysteresis Repeatability
Flat back
F
w/lug
Flat back
w/lug
543-702-02 543-702B-02 543-707-02 * 543-707B-02 *
195 165
0.5 in/ 12.7 mm
0.00002 / 0.00005 / 0.0001/0.0005 in, 0.0005 / 0.001 / 0.01 mm (selectable)
Spindle orientation for measurement • Standard models with measuring range 12.7 mm: Usable in all orientations. • Models with measuring range 25.4 or 50.8 mm: Usable between the contact point pointing downward and spindle in horizontal orientation. To use the contact point pointing upward, the auxiliary spindle spring (optional) is required. • Low measuring force model: See “Setting measuring force on low measuring force models” below.
±0.00012
0.4 to 0.7 190 160
0.00008 0.00008
543-722B-02 1 in/25.4 mm 543-732B-02 2 in/50.8 mm
— —
— 195 — 260 190 160
±0.00020
543-712-02 543-712B-02 543-717-02 * 543-717B-02 *
0.5 in/ 12.7 mm
±0.0010
0.2 to 0.5 185 155
0.0005 in/0.01 mm
0.0010 0.0005
543-727B-02 1 in/25.4 mm 543-737B-02 2 in/50.8 mm
— —
1.8 or less 2.3 or less
— 190 — 245
±0.0015
Inch/Metric
ISO/JIS Type
Order No.
Mass (g)
Repeatability R MPE
Measuring force (N)
Accuracy (mm)
Hysteresis H MPE
Setting measuring force on low measuring force models
Range
Resolution
Flat back
w/lug
Flat back
w/ lug
543-701-02 543-701B-02 543-706-02* 543-706B-02*
1.5 or less
175 165
0.00002 / 0.00005 / 0.0001/0.0005 in, 0.0005 / 0.001 / 0.01 mm (selectable)
The measuring force of models with low measuring force can be set by combining standard accessory springs and weights.
0.5 in/12.7 mm
0.003
0.4 to 0.7 170 160
0.002 0.002
543-721B-02 1 in/25.4 mm 543-731B-02 2 in/50.8 mm
— —
1.8 or less 2.3 or less 0.9 or less 1.8 or less 2.3 or less Measuring force (N) 1.5 or less 1.8 or less 2.3 or less 0.9 or less
— 195 — 260 170 160
• 543-715(B)/716(B)/717(B)
0.005
Weight (approximately 0.1 N)
Spindle orientation
Maximum measuring force (N)
Spring
543-711-02 543-711B-02 543-716-02* 543-716B-02*
0.5 in/12.7 mm
Yes Yes
Yes
0.5 or less 0.4 or less 0.3 or less 0.2 or less
0.02
0.2 to 0.5 165 155
0.0005 in/ 0.01 mm
0.02 0.01
No
Pointing vertically downward
543-726B-02 1 in/25.4 mm 543-736B-02 2 in/50.8 mm
— —
— 190 — 245
No No
Yes
0.04
No No
Horizontal 0.3 or less Note: Operation using configurations other than shown above is not guaranteed. Yes
Metric
ISO/JIS Type
Order No.
Mass (g)
Repeatability R MPE
Resolution (mm)
Accuracy (mm)
Hysteresis H MPE
Range (mm)
Flat back
w/lug
Flat back
w/lug
• 543-705(B)/706(B)/707(B)
543-700-02 543-700B-02 543-705-02* 543-705B-02*
175 165
12.7 25.4 50.8 12.7 25.4 50.8
0.0005/ 0.001 / 0.01 (selectable)
Weight (approximately 0.1 N)
Spindle orientation
Maximum measuring force (N)
Spring
0.003
0.4 to 0.7 170 160
0.002
0.002
543-720B-02 543-730B-02
— —
— 195 — 260 170 160
Yes Yes
Yes
0.7 or less 0.6 or less 0.4 or less
0.005
No
Pointing vertically downward
543-710-02 543-710B-02 543-715-02* 543-715B-02*
No No
Yes
0.02
0.2 to 0.5 165 155
No Not guaranteed Note: Operation using configurations other than shown above is not guaranteed.
0.01
0.02
0.01
543-725B-02 543-735B-02
— —
1.8 or less 2.3 or less
— 190 — 245
0.04
• Power source: CR2032 battery (1 pc.), included as standard • Battery life: Approx. 2,700 hours of continuous use. Approx. 2.5 years under normal use. ( Depends on use of the indicator. The above values are reference values.) * Low Measuring force.
Video
Refer to the Indicators Brochure ( 2340 ) for more details.
F-5
Powered by FlippingBook