Gage Blocks
Zero-It SERIES 950
• ”Zero-It” is specially designed for Mitutoyo Test Indicators with Dovetails, and functions as a quick and practical work positioning device. • Attach "Zero-It" directly to the collet, then zero in the work position by reading Mitutoyo Test Indicator. The hardened clamping post consists of three ODs, from top, 1/4”, 3/8” and 1/2”, and has hardness of approximately 58 to 60 Rockwell C.
SPECIFICATIONS Order No.
Coarse
Fine
950-110
10°
3/8”
950-110
Shown with optional test indicator.
Zero-Setter SERIES 950
E
• Fast and sure establishment of “0” reference point with built-in indicator. • Spring loaded setting face to safe guard against damage from over run. • Body dia. 1.44” (36.5mm) Wooden case included.
950-111
SPECIFICATIONS Order No.
Height
Graduation
950-111
1"
.0005"
Knife Edge Straight Edge SERIES 528
• The test edge is approximately .004” in thickness, a cross section of which has radius to provide a straight line contact with the work surface. Straightness is ±.00005”. • For ease of inspection, the blade is dyed in black, and the upper edge is covered with a grip plate. The acute angle is 30 degrees.
SPECIFICATIONS Order No. Length
Cross section
528-103
528-100 528-101 528-102 528-110 528-103 528-104 528-105 528-106 528-107
2"/50 mm 3"/75 mm 4"/100 mm 5"/125 mm 6"/150 mm 8"/200 mm 12"/300 mm 16"/400 mm
25 x 6 mm
528-104
32 x 7 mm 40 x 8 mm
20"/500 mm 50 x 10 mm
Need Support?
E-35
Powered by FlippingBook