Gage Block Calibration
Gage Block Comparator GBCD-250 SERIES 565 — Manual Comparator with Dual Gage Heads
Standard Accessories Main Unit – Long Range Display Unit – EH-S counter with output User’s Manual Installation - A2LA accredited Field Service installation
• Gage blocks between 0.1mm and 250mm easily can be compared to master gage blocks sets. • Rectangular gage block holder kit included • Provided standard: Main Unit & Display Unit with User’s manual, Certificate of Inspection, A2LA accredited Field Service Installation and NIST-traceable Certificate of Calibration SPECIFICATIONS Inch/Metric Model No. GBCD-250 Order No. 565-151A Range 0.1mm - 250mm / .004 - 10" Resolution 0.000001mm(0.01µm)/.0000001in(.1µin)
• This system employs two LGH, high accuracy, super wide-range gage heads (range = ±3mm) • Wide-Range function allows an entire Gage Block set to be calibrated with as few as 7 Master Gage Blocks • Dual head design allows accurate measurement, even when gage blocks have a slight curvature
Certificate of Calibration - NIST-traceable Certificate of Inspection from the factory Optional Accessories 962723 : Gage head calibration kit 02ASD130 : Square gage block holder kit 02ASF040 : Heat protection shield 02ASQ953 : GBPAK-M tracking software 937179T : Foot Switch 936937 : Connecting cable PMICPU002 Dell CPU, 64 BIT, WIN10 PMIMON002 monitor, Dell 22" widescreen
Supporting OS: Windows XP, Vista, 7, or 10
Comparison accuracy in narrow range (20°C) Wide Range Accuracy (within +/-3mm range)
±(0.03+0.3L/1000)µm* L = Gage block length (mm)
±(0.06+0.3L/1000)µm
E
Measuring units
Laser Hologage (upper and lower)
Operating condition Temperature: 20°C ±1°C
Humidity: 30% RH to 60% RH
Data output Dimensions (W x D x H)
Via SPC output port
Main unit: 455 x 318 x 691mm Display unit: 345 x 397 x 187mm
Mass Main unit: Approx. 52kg Display unit: Approx. 9kg * 95% confidence interval (not including the calibration error of the standard gage block).
Gage Block Comparator GBCD-100A SERIES 565 — Automatic-Type Comparator with Dual Gage Heads The GBCD-100A Automatic Gage Block Comparator is an easy-to-operate dual-head gage block inspecting system. It automatically compares
workpieces with a standard gage block and determines accuracies such as central length, maximum length, minimum length and parallelism through the operation of an optional personal computer.
Standard Accessories Main Unit, Controller, GBPAK-A (software), User’s Manual & Inspection Certificate. Optional Accessories 516-146-E1 :Gage block set for GBCD calibration PMICPU002 Dell CPU, 64 BIT, WIN10 PMIMON002 monitor, Dell 22" widescreen
SPECIFICATIONS Model No.
GBCD-100A
Order No. Resolution
565-172
0.00001mm (0.01µm) / .000001" 0.5mm - 100mm / .02 - 4" Differential (dual-head) type Mu-Checker ±(0.03+0.3L/1000)µm* L = Gage block length (mm) Upper gage head: 1N (100gf) Lower gage head: 0.6N (60gf)
Range
Measuring unit
Accuracy in narrow range (20°C) Measuring force
Air requirement 400kPa (4kgf/cm 2 ) Operating condition Temperature: 20°C ±1°C Humidity: 58%RH ±15%RH
Dimensions (W x D x H)
Main unit: 710 x 366 x 783mm Electronic unit: 160 x 410 x 382mm
Mass
Main unit: 120kg Electronic unit: 14kg
* 95% confidence interval (not including the calibration error of the standard gage block).
E-25
Powered by FlippingBook