Data Collection Software for Excel USB-ITPAK V3.0
Bidirectional serial communication
With bidirectional serial communication (Digimatic S1) enabled measuring instruments, it is possible to use USB-ITPAK V3.0 on a PC to control, configure, and collect information from the measuring instruments in addition to ordinary measurement data collection. This reduces labor and time for inspection and greatly increases efficiency. Digimatic S1 applicable model Example of measurement using the ID-CNX/ID-FNX
A
Function example (1) Control of ID-C/ID-F from PC
Instruments not supporting bidirectional serial communication + USB-ITPAK
ID-CNX/ID-FNX + USB-ITPAK V3.0
0.000
0.000
0.000
0.000
0.000
0.000
Zero set
Zero set Zero set Zero set
• It is necessary to manually zero-set or preset measuring instruments individually.
• It is possible to zero-set or preset measuring instruments collectively from USB-ITPAK V3.0 on a PC.
Function example (2) Measuring instrument setting
Instruments not supporting bidirectional serial communication + USB-ITPAK
ID-CNX/ID-FNX + USB-ITPAK V3.0
Examples of functions to set • Display unit • Measurement direction • Tolerance setting • Calibration date setting ➡Reduced work time for setting
• It is necessary to manually change the settings.
• It is possible to set the functions of measuring instruments from USB-ITPAK V3.0 . • The settings of functions can be saved on a PC and copied to other measuring instruments.
Note: The above is possible only when bidirectional serial communication (Digimatic S1) enabled measuring instruments are used with USB Input Tool Direct or 264-020 . It is not possible with measuring instruments not supporting Digimatic S1 or U-WAVE Series.
Got Questions?
A-14
Powered by FlippingBook