Depth Gage
• The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement. • Made of hardened stainless steel with micro-lapped base and measuring faces. Depth Gage SERIES 527 — Hook-end Type
Typical applications
• Depth can be directly measured with the upper Vernier of the slider and thickness with the lower Vernier. • Optional longer extension bases are available (refer to page D-16).
L 2
L 1 = Reading on depth Vernier
L 1
Vernier
L 3 = Reading on hook vernier
- Reading on depth Vernier L 2 = Reading on hook Vernier L 1 = Reading on depth Vernier
L 1 = Reading on depth Vernier
D
527-401
L 3
L 2
Base
L 1
L 2
SPECIFICATIONS Metric Order No.
L 1
Vernier
L 3 = Reading on hook vernier
Resolution / Graduation (mm)
Range (mm): L 1 (L 2 and L 3 )
Base (W×T) (mm)
Accuracy* (mm)
- Reading on depth Vernier
527-401 527-402 527-403 527-411 527-412 527-413
10 - 150 (0 - 150) 10 - 200 (0 - 200) 10 - 300 (0 - 300) 10 - 150 (0 - 150) 10 - 200 (0 - 200) 10 - 300 (0 - 300)
L 3 = Reading on hook vernier
±0.05
0.05
±0.08
- Reading on depth Vernier
100×6.5
L 3
±0.03
0.02
±0.04
L 3
* E MPE (ISO 13385-2:2020). Largest value across the measuring range
Vernier (both instances)
DIMENSIONS
Unit: mm
L
2-ø5
4
Range (mm)
L 0 - 150 260 0 - 200 310 0 - 300 410
9.5
527-401, -402, -403
Where to Buy
D-75
Powered by FlippingBook