Height Gage
Height Gage Optional Accessories for Height Gages
Dial Test Indicators
• For information about the attachment of dial test indicators, refer to Section F.
Contact Sensor
Center Probe
Depth Gage Attachment
D
900872 • This is a convenient sensor to be attached to both the workpiece* 1 and the height gage* 2 , giving a lamp display when the scriber touches the workpiece. *1 Conductive workpieces only. *2 Attach to a conductive part. • Magnet is incorporated. • Battery (PR44, 2 pcs. required) is not included. • Use it on a precision black
900581 (inch) 951144 (metric)
900878 (Inch) 900764 (metric) • Attaches to a height gage for measuring groove and hole depth. • Minimum hole diameter: 5.5 mm • Maximum distance from the bottom of the holding bar to the contact point: 80 mm (metric type), 2.95 in (inch type) • Dial indicator contact points are usable (refer to Section F). • Mounting bar section: .25 x .5 in (inch) 9×9 mm (metric) • Holding bar length: 4 in /100 mm
• Allows quick measurement of center-to-center distance between holes. • Measurable hole diameters: 1 to 38 mm • Mounting bar section: .25 x .5 in (Inch), 9×9 mm (metric)
granite surface plate (refer to Section A).
Need Support?
D-61
Powered by FlippingBook