Height Gage
Linear Height SERIES 518 — High-performance 2D Measurement System
Adjustable to easy-to-see angle
• This is a precision height gage featuring high accuracy and outstanding ease of use. It is useful not only in height measurement but also in a wide range of applications such as inspection of moulds and precision parts. • Easy operation using keypad and touch screen navigation allows intuitive operation that is suitable even for beginners. • The built-in scale is dirt-resistant and can be reliably used on shop floors. • Various interfaces are available, including connection to a printer, a PC, and our wired or wireless communication system. • Pneumatic full/semi-floating suspension system allows adjustment of air-cushion height. • It is easily expandable to support various types of optional probes to meet your different measurement needs.
518-361-11
Measurement guidance
D
Intuitive operation thanks to guidance.
SPECIFICATIONS Model
LH-600F
LH-600FG 518-361-13
Order No. Power grip
518-360-13
inch/mm
Without power grip
With power grip
0 to 977 mm (600 mm) 0 to 38 in (24 in)
Measuring range (Stroke)
0.0001/0.001/0.01/0.1 mm (selectable) 0.000001/0.00001/0.0001/0.001 in (selectable) (43+L)μin, L = Measuring length (inch) (1.1 + 0.6L/600)μm, L = Measuring length (mm) Plane: 0.4 μm (2 σ ), Hole: 0.9 μm (2 σ )
Resolution
Indication accuracy* 1
Home screen Measurement menu display is easy to understand visually. The guidance makes it easy for first-time users to operate the system.
Repeatability* 1
Accuracy
Perpendicularity (forward and backward)* 2 Straightness (forward and backward)* 2
5 µm
4 µm
Driving method (speed)
Motor-driven (5, 10, 15, 20, 25, 30, 40 mm/s: 7 steps)/Manual
Scale unit
Photoelectric incrermental encoder STVC-20Z 1 N (automatic constant-force function)
Measuring force
Main unit moving mode
Full-floating (moving)/Semi-floating (measuring) Air bearing (built-in compressor)
Display unit
8.4 inch touch-screen, LCD
Stepless tilt adjustment: 0 to 40° Stepless swivel adustment: -30 to 180°
Adjustment of display unit Preventive maintenance Probe diameter compensation
Scale status notification, calibration schedule notification
Semi-automatic compensation using the probe diameter calibration block (standard accessory) Compensation by inputting the probe diameter
2D measurement - Pre-placement: This function allows the user to register the hole position of the workpiece before measurement.
Power source
AC adapter 120V, 60 Hz/Battery (NiMH)
Battery operation time* 3 Battery charging time* 5 Dimensions (W×D×H)
Battery powered (standard): 1-4 hours* 4 , powered by 2 batteries: 2-8 hours
Approx. 3.5 hours (can be used while charging)
238×492×996 mm
Mass
26.1 kg
26.6 kg
Operating temperature/humidity ranges
5 to 40° C/20 to 80% RH (non-condensing)
Data output Digimatic D1/D2/S1 (bi-directional communication), RS232 (DB9) • Use in an environment that is as close as possible to 20° C, and subject to minimal temperature change over time. *1: Indication accuracy and repeatability represent the values obtained when the standard ø5 stepped prove is used. *2: Guaranteed when using the Lever Head ( 519-521 ), Mu-Checker ( 519-562A ) SPC cable ( 936937 ), and probe mounting adapter ( 932361 ). *3: Battery life depends on duty cycle. *4: One battery pack ( 12AAF712 ) is provided as standard. *5: When ambient temperature is 30° C or higher, the battery may not charge sufficiently.
Perpendicular/straightness measurement - Graph creation: You can check the measurement results of perpendicularity and straightness in real time during measurement (using optional indicator and indicator holder).
LH Communication-Tool V1.0 software for creating inspection reports and configuring system settings
You can easily create and save inspection reports and configure device parameters. * Available at Mitutoyo website for free download. * To connect to a PC, use a USB cable (type A-B).
Part program measurement: You can easily create, execute, edit, and even display the results of part programs.
D-49
Powered by FlippingBook