Calipers
ABSOLUTE Inside Caliper SERIES 573 — Knife-edge/Inside Groove/Point Jaw Type
• Specially designed for inside measurements. Select the right model for your workpiece shape.
Measurement example
Knife-edge type
573-742-20
Optional Accessories Order No. Type
Description
D
Inside groove type
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U
264-020
—
Connection cable for IT / DP / MUX (1 m) Connection cable for IT / DP / MUX (2 m)
05CZA624
A
05CZA625
A
573-745-20
Compensation value
06AFM380A
A USB Input Tool Direct (2 m)
Point jaw type
02AZD730G
IP67 U-WAVE-T
02AZD880G Buzzer U-WAVE-T
02AZE200
U-WAVE-T mounting bracket
—
573-746-20
Compensation value SPECIFICATIONS Inch/Metric
Connection cable for U-WAVE-T (160 mm) Connection cable for U-WAVE-T For foot switch
02AZD790A
A
02AZE140A
A
Digimatic model
Order No.
Range
Resolution
Accuracy*
Remarks
264-620
IP67 U-WAVE-TC
0.4 - 8 in/ 10 - 200 mm
573-742-20
Knife-edge type, Measurable min.
0.0005 in/ 0.01 mm
0.404 - 6.4 in/ 10.26 - 160.16 mm 0.804 - 6.8 in/ 20.42 - 170.32 mm
573-745-20 * 2
Inside groove type, Measurable min.
264-621
Buzzer U-WAVE-TC
573-746-20 * 2
Point jaw type, Measurable min.
264-624
IP67 U-WAVE-TCB
Metric
Digimatic model
Order No.
Range (mm)
Resolution (mm) Accuracy (mm)*
Remarks
264-625
Buzzer U-WAVE-TCB
573-642-20 573-643-20 * 1 573-645-20 * 2 573-647-20 * 1 573-646-20 * 2 573-648-20 * 1
10 - 200 10 - 200
Knife-edge type, Measurable min. Knife-edge type, Measurable min. Inside groove type, Measurable min. Inside groove type, Measurable min. Point jaw type, Measurable min. Point jaw type, Measurable min.
02AZF310 Connecting unit for U-WAVE-TC / TCB Note: U-WAVE-TC / TCB cannot be used with Knife-edge Type ( 573-642-20 , 573-643-20 and 573-742-20 ). IP67
10.1 - 160 10.1 - 160 20.1 - 170 20.1 - 170
0.01
• Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks) • Battery life: Approx. 5 years under normal use * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 Without thumb roller *2 Includes the offsetting function, which indicates the actual measurement value.
Need Support?
D-35
Powered by FlippingBook