Calipers
ABSOLUTE Back-Jaw Centerline Caliper SERIES 573 — Center-to-center & Edge-to-center
• Specially designed to measure hole center-to- center and edge-to-center distances. • Provided with jaws on the back of the slider, measurements can be read easily from above.
• Direct reading of pitch measurement is possible due to the offset-value setting function.
Optional Accessories Order No. Type
Description
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U
264-020
—
Connection cable for IT / DP / MUX (1 m) Connection cable for IT / DP / MUX (2 m)
05CZA624
A
Edge-to-center distance type
573-718-20
05CZA625
A
SPECIFICATIONS Metric Order No.
06AFM380A
A USB Input Tool Direct (2 m)
Range (mm) 10.1 - 200
Resolution (mm)
Accuracy (mm)*
02AZD730G
IP67 U-WAVE-T
573-718-20 * 1 573-719-20 * 1
0.01
D
10.1 - 300 • Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks) * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 Applicable hole diameter: ø1.5 - ø19.5 mm
02AZD880G Buzzer U-WAVE-T
02AZE200
U-WAVE-T mounting bracket
—
Connection cable for U-WAVE-T (160 mm) Connection cable for U-WAVE-T For foot switch
02AZD790A
A
DIMENSIONS
02AZE140A
A
Unit: mm
Inspection equipment for Center-to-center type* 05FAJ735
ø1
573-718-20 573-719-20
Unit: mm
ø20
(250)
150 4 × ø5
50
100
0
Center-to-center distance type
573-716-20
SPECIFICATIONS Metric Order No.
* Inspection equipment for Edge-to-center type is available by special order.
Range (mm) 10.1 - 200
Resolution (mm)
Accuracy (mm)*
573-716-20 * 1 573-717-20 * 1
0.01
10.1 - 300 • Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks) * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 Applicable hole diameter: ø1.5 - ø19.5 mm
DIMENSIONS
Unit: mm
ø1
ø10
Where to Buy
573-716-20 573-717-20
D-31
Powered by FlippingBook