Calipers
• Long jaws for measuring hard-to-reach workpiece features. Suitable for measuring outside diameter of workpieces such as large pipes or spherical objects. Long Jaw Vernier Caliper SERIES 534
• Inside and outside measurements can be read directly from the upper and lower slider graduations respectively.
534-102
D
SPECIFICATIONS Metric/Inch Order No.
with metric/inch double scale
Range* 1
Graduation 0.05 mm/ 1/128 in 0.02 mm/ 0.001 in 0.05 mm/ 1/128 in 0.02 mm/ 0.001 in 0.05 mm/ 1/128 in 0.02 mm/ 0.001 in 0.05 mm/ 1/128 in
Accuracy* ±0.07 mm/ ±0.5/128 in ±0.04 mm/ ±0.0015 in ±0.13 mm/ ±0.5/128 in ±0.06 mm/ ±0.0025 in ±0.16 mm/ ±1/128 in ±0.08 mm/ ±0.003 in ±0.2 mm/ ±1/128 in
Remarks
0 - 300 mm/0 - 12 in (10.1 - 300 mm/0.398 - 12 in) 0 - 300 mm/0 -12 in (10.1 - 300 mm/0.398 - 12 in) 0 - 500 mm/0 - 20 in (20.1 - 500 mm/0.791 - 20 in)
+10 mm/0.394 in to reading in inside measurement without fine adjustment
534-101
534-105
534-102
534-106
+20 mm/0.787 in to reading in inside measurement without fine adjustment
534-103
0 - 750 mm/0 - 30 in (20.1 - 750 mm/0.791 - 30 in)
534-107
534-104
0 - 1000 mm/0 - 40 in (20.1 - 1000 mm/0.791 - 40 in)
534-108 ±0.1 mm/ ±0.004 in * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. 0.02 mm/ 0.001 in
*1 ( ): Minimum dimension in ID measurement Note: For external dimensions, refer to page D-26. Metric Order No. Range (mm)* 1
Graduation (mm)
Accuracy*
Remarks
534-109 534-110
0 (10.1) - 300 0 (20.1) - 500
±0.07
0.05
without fine adjustment
±0.13 * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 ( ): Minimum dimension in ID measurement
Got Questions?
D-25
Powered by FlippingBook