Calipers
Vernier Caliper SERIES 160 — with Nib Style Jaws and Fine Adjustment
• The jaws' measuring faces have a radius for accurate inside diameter (ID) measurement. Inside and outside measurements can be read directly from the upper and lower slider graduations respectively.
• With fine adjustment ( Order No. 160-127 / 128 / 101 / 104 ).
Measurement example
160-116
Fine adjustment wheel
D
160-125
SPECIFICATIONS Inch Order No.
Radiused jaws for accurate ID measurement
Range (in)* 1 0 (0.304) - 12 0 (0.504) - 18 0 (0.504) - 24
Minimum reading (in)
Accuracy (in)*
Remarks
Measurement example
160-124 160-116 160-102 160-105
±0.0015
0.001
±0.002
—
0 (1.004) - 40 ±0.003 * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 ( ): Minimum dimension in ID measurement Inch/Metric Order No. Range* 1 Minimum reading Accuracy* Remarks 160-125 0 - 12 in/0 - 300 mm (0.304 - 12 in/7.72 - 300 mm) with metric/inch double scale
±0.0015 in/ ±0.04 mm ±0.002 in/ ±0.05 mm ±0.003 in/ ±0.07 mm
+0.3 in/7.62 mm to reading in inside measurement +0.5 in/12.7 mm to reading in inside measurement
0 - 18 in/0 - 450 mm (0.504 - 18 in/12.8 - 450 mm) 0 - 24 in/0 - 600 mm (0.504 - 24 in/12.8 - 600 mm) 0 - 40 in/0 - 1000 mm (1.004 - 40 in/25.5 - 1000 mm)
160-119
0.001 in/ 0.02 mm
160-103
160-106 +1 in/25.4 mm to reading in inside measurement * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 ( ): Minimum dimension in ID measurement
Find a Distributor
D-23
Powered by FlippingBook