Calipers
• This is a standard analog caliper. It can measure the outside, inside, depth, and step. • The small Vernier face angle (14°) provides easy reading. Vernier Caliper SERIES 530 — Standard Model
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
Measurement example
530-105
Round depth bar type
D
SPECIFICATIONS Inch
with inch/inch double scale
Order No.
Range (in)
Graduation (in)
Accuracy (in)
Depth bar
Remarks
530-105 530-116
0 - 6 0 - 8
0.001 (1/128)
±0.001 (±0.5/128)
Blade
—
530-102
Metric/Inch
with metric/inch double scale
Order No.
Range
Graduation
Accuracy
Depth bar
Remarks
530-104 530-316 530-312
—
±0.05 mm/ ±0.5/128 in ±0.03 mm/ ±0.001 in ±0.05 mm/ ±0.5/128 in ±0.03 mm/ ±0.001 in ±0.08 mm/ ±0.5/128 in ±0.04 mm/ ±0.0015 in
Carbide-tipped jaws for outside measurement
0.05 mm (1/128 in)
0 - 150 mm/ 0 - 6 in
Clamping screw below the slider
0.02 mm (0.001 in)
High accuracy model
530-114
0.05 mm (1/128 in)
—
0 - 200 mm/ 0 - 8 in
Blade
530-118
0.02 mm (0.001 in)
High accuracy model
530-115
0.05 mm (1/128 in)
—
0 - 300 mm/ 0 - 12 in
530-119
0.02 mm (0.001 in)
High accuracy model
Metric Order No. 530-101 530-122 530-108 530-123 530-109 530-124 530-100 530-102 530-320 Order No.
Range (mm)
Graduation (mm)
Accuracy (mm)* Depth bar
Remarks
530-320
0.05 0.02 0.05 0.02 0.05 0.02
±0.05 ±0.03 ±0.05 ±0.03 ±0.08 ±0.04
—
0 - 150
High accuracy model
—
Blade
0 - 200
High accuracy model
—
0 - 300
High accuracy model
Range (mm)
Graduation (mm)
Accuracy (mm)* Depth bar
Remarks
0 - 100
— —
ø1.9 mm rod
Carbide-tipped jaws for outside measurement Carbide-tipped jaws for outside and inside measurement Carbide-tipped jaws for outside measurement Carbide-tipped jaws for outside measurement
0 - 150
±0.05
530-335
0.05
Blade
530-321
0 - 200
530-322 530-501 530-502
0 - 300 0 - 600 0 - 1000
±0.08 ±0.10
—
—
±0.15 * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table.
Need Repair?
D-9
Powered by FlippingBook