Calipers
Dial Caliper SERIES 505
• Can measure OD, ID, depth and steps. • Easy-to-read font on dial and main scale. • Improved finish on sliding surfaces for longevity. • Thumb roller for smoother measurements. • Lock screws for dial bezel and slider lock.
505-742J
• Carbide-tipped models available. • Supplied in a fitted plastic case.
505-742-55J
.100” per revolution
505-742-56J
D
.200” per revolution
SPECIFICATIONS Inch Order No.
Range (in) Graduation (in)
Accuracy (in)*
Remarks
505-742J * 1 505-742-51J 505-742-52J 505-742-53J 505-742-54J 505-742-55J 505-742-56J 505-736 * 1 505-738 * 1 505-740J 505-744 505-741J 505-743J * 1 505-737 * 1 505-739 * 1
—
Blue Dial Face Purple Dial Face Green Dial Face Red Dial Face Orange Dial Face Black Dial Face
0.001, 0.1/rev
1mm per revolution
0 - 6
±0.001
Carbide-tipped jaws for outside measurement
Carbide-tipped jaws for outside and inside measurement
—
0.001, 0.2/rev 0.001, 0.2/rev 0.001, 0.1/rev
Carbide-tipped jaws for outside measurement
—
0 - 8
Carbide-tipped jaws for outside measurement
2mm per revolution
0.001, 0.2/rev
Carbide-tipped jaws for outside and inside measurement
505-749 505-746 * 1 505-750 505-747 * 1 505-748 * 1
±0.002
—
0.001, 0.1/rev 0.001, 0.2/rev 0.001, 0.1/rev
0 - 12
Carbide-tipped jaws for outside measurement
Carbide-tipped jaws for outside and inside measurement
Metric Order No. Range (mm) Graduation (mm) Accuracy (mm)*
Reading
Remarks
(B)
505-730 505-734 505-735
—
Carbide-tipped jaws for outside measurement
0.02, 2/rev
±0.03
0 - 150
Carbide-tipped jaws for outside and inside measurement
(A) Main scale reading 20. mm (B) Dial reading 0.00 mm 20.00 mm
505-732 * 1 505-733 * 1 505-731 505-745
±0.02 ±0.03
0.01, 1/rev
—
0 - 200 0 - 300
0.02, 2/rev
±0.04 * E MPE (ISO 13385-1:2019 and ASME B89.1.14-2018). Largest value across the measuring range. See page D-47 for MPE table. *1 Silver cover type
The series provides two types: Graduation 0.02 mm (2 mm/rev.) and Graduation 0.01 mm (1 mm/rev.).
DIMENSIONS
L
Unit: mm
E
Range (mm) A B D E H L 0 - 150 16.5 21 40 57.2 16 231 0 - 200 20 24.5 50 288 0 - 300 22 27.5 64 70.2 20 404 Outside jaw thickness: 3.5 mm ( 505-745 : 3.8 mm)
D-8
Powered by FlippingBook