Calipers
ABSOLUTE Digimatic Caliper SERIES 500 — with Exclusive ABSOLUTE Encoder Technology
• This is a standard digital calliper. The digital display can reduce human error by preventing incorrect readings of measurement results. • Incorporates the Mitutoyo ABSOLUTE measurement system. No need to reset the origin after switching on. Eliminates overspeed errors.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. • SPC data output models can be integrated into statistical process control and measurement systems. (Refer to section A).
Functions • ABSOLUTE measurement: after a data is displayed, next measurement can be performed without zero-setting. Also, the ABS origin point can be changed with ORIGIN switch. • Incremental measurement: Sets the displayed value to zero (zero-setting) at any position, making comparative measurement easier. • Low-voltage alert: notifies that the battery is worn with “B” mark before becoming immeasurable. Thus, the timing for battery replacement can be confirmed in advance. • Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Note: Excludes models without measurement output data port. See SPECIFICATIONS on page D-6. • Data hold: With the optional hold unit, the function can hold the displayed value (cannot be used with the output function). Optional Accessories (Note: Usable only for models with SPC data output. Refer to section A for details.) Order No. Type Description
500-196-30
D
500-197-30
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U
264-020
—
Connection cable for IT / DP / MUX (1 m) Connection cable for IT / DP / MUX (2 m)
959149
C
959150
C
500-193-30
06AFM380C
C USB Input Tool Direct (2 m)
02AZD730G IP67* U-WAVE-T
02AZD880G Buzzer U-WAVE-T
DIMENSIONS
02AZE200
U-WAVE-T mounting bracket
—
Connection cable for U-WAVE-T (160 mm) Connection cable for U-WAVE-T For foot switch
02AZD790C
C
Unit: mm
With thumb roller
L
02AZE140C
C
L
264-620
IP67* U-WAVE-TC
264-621
Buzzer U-WAVE-TC
264-624
IP67* U-WAVE-TCB
with thumb roller
264-625
Buzzer U-WAVE-TCB
with thumb roller
02AZF300 Connecting unit for U-WAVE-TC / TCB * IP-67 is applied to these U-WAVE-T / -TC / -TCB , but not to the calipers on page D-6 to D-7. Buzzer
L
L
Without thumb roller
Range (mm)
A
B
C D H
L
0 - 100 0 - 150 0 - 200 0 - 300
182 233 290
16.5 21 14.5 40
16
20 24.5 18
50
22 27.5 19.8 64
20 404 Jaw thickness: 3.5 mm for 0 to 100 mm/0 to 150 mm/0 to 200 mm models and 3.8 mm for 0 to 300 mm model
D-5
Powered by FlippingBook