Calipers
ABSOLUTE Coolant Proof Caliper SERIES 500 — with Dust/Water Protection Conforming to IP67 Level
• Rated to IP67: can be used in workshop conditions exposed to coolant, water, dust or oil. The digital display can reduce human error by preventing incorrect reading of measurement results. • Incorporates the Mitutoyo ABSOLUTE measurement system. No need to reset the origin after switching on. Eliminates overspeed errors.
• Battery cap does not require a screw driver for battery replacement. • SPC data output models can be integrated into statistical process control and measurement systems. (Refer to section A). • Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grindingstones, etc.
Functions • Origin-set: ABSOLUTE origin position can be changed. • Data output: Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. Note: Excludes models without measurement output data port. See SPECIFICATIONS on page D-4. • Automatic power on/off: Turns off the LCD display if the caliper remains unused for approximately 20 minutes after measurement, although the origin is still memorized. Moving the slider restores the display. • Alarm: Should a computing error occur, the display shows an error message causing the measurement function to stop. This prevents an instrument from giving an erroneous reading. Also, when the battery voltage drops to a certain level, the “B” mark appears to indicate low battery voltage before the measurement becomes unavailable. Optional Accessories (Note: Usable only for models with SPC data output. Refer to Section A for details.) Order No. Type Description
D
500-762-20
USB Input Tool Series USB Keyboard Signal Conversion Type IT-020U Connection cable for IT / DP / MUX (1 m)* 1 Connection cable for IT / DP / MUX (2 m)* 1
264-020
—
05CZA624
A
500-763-20
05CZA625
A
06AFM380A
A USB Input Tool Direct (2 m)
IP67 U-WAVE-T * 2
02AZD730G
02AZD880G Buzzer U-WAVE-T * 2
02AZE200
U-WAVE-T mounting bracket
—
500-764-20
Connection cable for U-WAVE-T (160 mm) Connection cable for U-WAVE-T For foot switch
02AZD790A
A
02AZE140A
A
IP67 U-WAVE-TC * 2
264-620
Buzzer U-WAVE-TC * 2
264-621
IP67 U-WAVE-TCB * 2
264-624
Buzzer U-WAVE-TCB * 2
264-625
02AZF310 Connecting unit for U-WAVE-TC / TCB *1 Cannot be used for other than water resistant type IP67 Digital calipers with external output function. *2 IP67 model is water/dust-proofed suitable for the factory floor. Buzzer type is not water/dust- proofed.
D-3
Powered by FlippingBook