Bore Gages
Bore Gages SERIES 511 — with Micrometer Head
• Micrometer head is attached to the anvil for convenient and accurate dimensional measurements. • Carbide-tipped contact point for durability and wear resistance. • Wide-range mic head allows range adjustments to be made quickly and without spacers
Measurement example
C
511-853-20
SPECIFICATIONS Inch Order No. Range (in)
Dial protection cover, recommended indicators Refer to page C-52.
Stroke of contact point (in)
Repeatability* (in)
Adjacent error* (in)
Measuring force (N)
Guide force (N)
Accuracy* (in)
511-833 511-834 511-835 511-836 511-837 511-838
2.4 - 4.0 4.0 - 6.4 6.0 - 10.0 10.0 - 16.0 16.0 - 24.0 24.0 - 32.0 2.4 - 4.0 4.0 - 6.4 6.0 - 10.0 10.0 - 16.0 16.0 - 24.0 24.0 - 32.0 2.4 - 4.0 4.0 - 6.4 6.0 - 10.0 10.0 - 16.0 16.0 - 24.0 24.0 - 32.0
5 or less
10 or less
15 or less
0.063
0.00008
0.00002
0.00004
Setting rings, Bore Gage Checker, i-Checker Refer to pages C-53 to C-58.
6 or less
20 or less
511-853-20 511-854-20 511-855-20 511-856-20 511-857-20 511-858-20 511-843-20 511-844-20 511-845-20 511-846-20 511-847-20 511-848-20
5 or less
10 or less
15 or less
0.063
0.00008
0.00002
0.00004
6 or less
20 or less
5 or less
10 or less
0.063
0.00008
0.00002
0.00004
15 or less
6 or less
20 or less
Probing depth (in)
Contents of set
Order No.
Special sizes and specifications other than standard can be custom made by special order. Please visit the nearest M³ Solution Center for more information. Example
Bore gage 511-833 511-834 511-835 511-836 511-837 511-838
Dial indicator
Dial protection cover Micrometer head Sub-Anvil Spanner
511-833 511-834 511-835 511-836 511-837 511-838
2 pcs. 3 pcs. 4 pcs. 3 pcs. 2 pcs. 2 pcs. 2 pcs. 3 pcs. 4 pcs. 3 pcs. 2 pcs. 2 pcs. 2 pcs. 3 pcs. 4 pcs. 3 pcs. 2 pcs. 2 pcs.
3 pcs.
6
Not supplied
Not supplied
1 pc.
2 pcs.
10
L 15
511-853-20 511-833 511-854-20 511-834 511-855-20 511-835 511-856-20 511-836 511-857-20 511-837 511-858-20 511-838 511-843-20 511-833 511-844-20 511-834 511-845-20 511-835 511-846-20 511-836 511-847-20 511-837 511-848-20 511-838
3 pcs.
4
2923AB-10 (Graduation: 0.0001 in)
6
21DZA000
1 pc.
2 pcs.
10
3 pcs.
4
Length below the grip 607
A858mm9 50,100,200,250,300,400,500,600,700,800,900,1000 50,100,150,200,300,400,500,600,700,800,900,1000
CGM-100Xe160X CGM-250Xe800X
2922AB (Graduation: 0.0005 in)
6
Model
L 15 (mm)
ba854a258b75e9aecf7deb32
21DZA000
1 pc.
2 pcs.
511-803 / 804 50 , 100 , 200 , 250 , 300 , 400 , 500 , 600 , 700 , 800 , 900 , 1000 50 , 100 , 150 , 200 , 300 , 400 , 500 , 600 , 700 , 800 , 900 , 1000 Note: The length over listed above is not available. L 15 511-805 / 806 / 807 / 808
10
* Accuracy of the bore gage alone. Note 1: Storage boxes for 511-837/838 models are made of wood. The boxes of other models are made of plastic. Note 2: It is not permissible to expand measuring range using sub-anvils other than as supplied as standard accessories. (The measurement accuracy in such cases is not guaranteed.)
C-44
Powered by FlippingBook