SPECIFICATIONS Metric Order No. Range (mm)
Accuracy* (µm)
Repeatability* (µm)
Adjacent error* (µm)
Measuring force (N)
Guide force (N)
Stroke of contact point (mm)
Recommended Digimatic Indicators (see Chapter 07) • Inch type: 543-312B-10 (0.00005 in /0.001 mm) • Metric type: 543-310B-10 (0.001 mm)
511-701 511-702 511-703 511-704 511-705 511-706
18 - 35 35 - 60 50 - 150 100 - 160 160 - 250 250 - 400 18 - 35 35 - 60 50 - 150 100 - 160 160 - 250 250 - 400 18 - 35 35 - 60 50 - 150 100 - 160 160 - 250 250 - 400
1.2
4 or less
6 or less
2
0.5
1
5 or less
10 or less
1.6
6 or less
15 or less
511-721-20 511-722-20 511-723-20 511-724-20 511-725-20 511-726-20 511-711-20 511-712-20 511-713-20 511-714-20 511-715-20 511-716-20 511-921-20 511-922-20 511-925-10
1.2
4 or less
6 or less
2
0.5
1
5 or less
10 or less
1.6
6 or less
15 or less
1.2
4 or less
6 or less
• The ID measurement can be performed easily since the minimum value is detected automatically. • Up to three combinations of master value and tolerance value can be set. • Nine measurement results (maximum) can be saved and recalled from memory (when no external device is connected). Refer to page F-15 for details.
2
0.5
1
5 or less
10 or less
C
1.6
6 or less
15 or less
See SPECIFICATIONS of 511-701 / 702 / 703
18 - 150
• Inch type: 543-702B (0.00002 in /0.0005 mm) • Metric type: 543-700B (0.0005 mm)
Contents of set
Probing depth (mm)
Order No.
Bore gage Dial indicator Dial protection cover Anvil Interchangeable Washer Sub-Anvil
Spanner
511-701 511-701 511-702 511-702 511-703 511-703 511-704 511-704 511-705 511-705 511-706 511-706 511-721-20 511-701 511-722-20 511-702 511-723-20 511-703 511-724-20 511-704 511-725-20 511-705 511-726-20 511-706 511-711-20 511-701 511-712-20 511-702 511-713-20 511-703 511-714-20 511-704 511-715-20 511-705 511-716-20 511-706
9 pcs. 6 pcs.
2 pcs.
1 pc.
100
Not supplied
11 pcs. 13 pcs. 6 pcs. 5 pcs. 9 pcs. 6 pcs. 6 pcs. 5 pcs. 9 pcs. 6 pcs. 11 pcs. 13 pcs. 11 pcs. 13 pcs.
4 pcs.
1 pc.
150
Not supplied Not supplied
Not supplied
Not supplied
7 pcs.
250
1 pc.
2 pcs.
1 pc.
100
Not supplied
2109AB-10 (Graduation: 0.001 mm)
4 pcs.
1 pc.
150
21DZA000
Not supplied
Anvil A carbide ball is used for the contact point. It is more abrasion resistant than a hardened steel ball and, as its surface is smoother than that of a carbide tip, the • When using with 543-700B or 543-702B , modification of the setting is required. Refer to page F-5 for details.
Not supplied
7 pcs.
250
1 pc.
2 pcs.
1 pc.
100
Not supplied
2046AB (Graduation: 0.01 mm)
4 pcs.
1 pc.
150
21DZA000
Not supplied
Not supplied
6 pcs. 5 pcs.
7 pcs.
250
1 pc.
workpiece is less liable to be marked. Comparison of abrasion resistance
2046AB
511-921-20 511-922-20 511-925-10
Set of 511-701 / 702 / 703
2109AB-10 543-310B
21DZA000
See SPECIFICATIONS of 511-701 / 702 / 703
Hardened steel ball (conventional model)
Carbide ball (current model)
* Accuracy of the bore gage alone. Note 1: A 50 mm sub-anvil is supplied with 511-703 , and a 75 mm sub-anvil is supplied with 511-706 . Note 2: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)
DIMENSIONS
Unit: mm
Anvil
Approx. 80
123
100
Unit: mm
(L 1 )
Inch: 23 Metric: 32
L 14
3
Anvil
Abrasion depth: 0.1 mm 750 HV or more
Abrasion depth: 0.001 mm 1350 HV or more
M5×0.5
SR1.5 Carbide ball
Inspection method • Load a 0.5 N weight on the anvil, and slide for 1,000 m on abrasive paper of 9 µm (#2000) particle size. Comparison of marks on the workpiece
Contact point
SR0.75 Carbide ball
6.4
Interchangeable washer
(L 1 )
コード No. ・符号
刻印 No.
サイズ（ mm ）
L （ mm ）
パーツ No.
205624 205623 1 0.5 （t mm ） パーツ No.
18 - 35 mm/0.7 - 1.4 in
t
L 14
3
21DZA213A
2.5 4.5 6.5
1
18 20
Carbide ball (current model)
Carbide tip (conventional model)
21DZA213B 21DZA213C 21DZA213D 21DZA213E 21DZA213F 21DZA213G 21DZA213H 21DZA213J
2 3
22
STANDARD ACCESSORIES Bore gage (Main body) Marked No. Order No.
4
24
8.5
No.511-701 CG-35AX
Ra0.06
5
26
10.5
Ra0.4
M5×0.5
SR1.5 Carbide ball
6
28
12.5
Anvil
7
30
14.5
8 t (mm) Order No. 0.5 205623 1 205624 32 16.5 9 34 18.5
Indication of measuring size
L 14
L 1
Result of contour measurement
Result of contour measurement
21DZA213A 0.71 in /18 mm 21DZA213B 0.79 in /20 mm 21DZA213C 0.87 in /22 mm 21DZA213D 0.94 in /24 mm 21DZA213E 1.02 in /26 mm 21DZA213F 1.10 in /28 mm 21DZA213G 1.18 in /30 mm
1 2 3 4 5 6 7 8 9
コード No. ・符号 5.5
2.5 4.5 6.5 8.5
刻印 No.
サイズ（ mm ）
L （ mm ）
パーツ No.
205624 205623 1 0.5 （t mm ） パーツ No.
Depth: 1 µm or less
Depth: 10 µm
21DZA213A
2.5 4.5 6.5
1
18 20
No.511-701 CG-35AX 9.5 7.5
21DZA213B 21DZA213C 21DZA213D 21DZA213E 21DZA213F 21DZA213G 21DZA213H 21DZA213J
2 3
Spanner 102148
22
4
24
8.5
5
26
10.5
11.5 13.5 15.5 17.5
Vertical magnification: 2,000 Horizontal magnification: 200
Vertical magnification: 2,000 Horizontal magnification: 200
6
28
12.5
511-701 511-731
7
30
14.5
32 10.5 12.5 14.5 16.5 18.5 34
47
8
16.5
Inspection method • Load a 4 N weight on the anvil, and slide on the aluminum plate back and forth for 20 times.
9
18.5
Thickness: 1.5
21DZA213H 1.26 in /32 mm 19.5 21DZA213J 1.34 in /34 mm 21.5
C-38
Powered by FlippingBook