Bore Gages
Bore Gages SERIES 511
Contact Points
• This is a bore gage for measuring .7 to 16 inch inside diameters. It is suitable for highly accurate measurements. • Carbide-tipped contact point and anvil for durability and wear resistance. • Optional extension rods can be attached for measuring deep holes.
Round guide
Round guide
1.4 - 2.5 in /35 - 60 mm 0.7 - 1.4 in /18 - 35 mm
511-753-20
Roller guides
C
SPECIFICATIONS Inch Order No. Range (in)
2.0 - 6.0 in /50 - 150 mm
Repeatability* (in)
Adjacent error* (in)
Stroke of contact point (in)
Measuring force (N)
Guide force (N)
Accuracy* (in)
Roller guides
511-731 511-732 511-733 511-734 511-735 511-736
0.7 - 1.4 1.4 - 2.5 2.0 - 6.0 4.0 - 6.5
0.047
4 or less
6 or less
0.00008
0.00002
0.00004
5 or less
10 or less
0.063
6.5 - 10.0 10.0 - 16.0
6 or less
15 or less
4.0 - 6.5 in /100 - 160 mm
511-751-20 511-752-20 511-753-20 511-754-20 511-755-20 511-756-20 511-741-20 511-742-20 511-743-20 511-744-20 511-745-20 511-746-20 511-931-20 511-932-20 511-935-10
0.7 - 1.4 1.4 - 2.5 2.0 - 6.0 4.0 - 6.5
0.047
4 or less
6 or less
0.00008
0.00002
0.00004
5 or less
10 or less
Roller guides
0.063
6.5 - 10.0 10.0 - 16.0
6 or less
15 or less
0.7 - 1.4 1.4 - 2.5 2.0 - 6.0 4.0 - 6.5
0.047
4 or less
6 or less
0.00008
0.00002
0.00004
5 or less
10 or less
0.063
6.5 - 10.0 in /160 - 250 mm
6.5 - 10.0 10.0 - 16.0
6 or less
15 or less
Roller guides
See SPECIFICATIONS of 511-731 / 732 / 733
0.7 - 6.0
Contents of set
Probing depth (in)
Order No.
Bore gage Dial indicator Dial protection cover Anvil Interchangeable Washer Sub-Anvil
Spanner
511-731 511-731 511-732 511-732 511-733 511-733 511-734 511-734 511-735 511-735 511-736 511-736 511-751-20 511-731 511-752-20 511-732 511-753-20 511-733 511-754-20 511-734 511-755-20 511-735 511-756-20 511-736 511-741-20 511-731 511-742-20 511-732 511-743-20 511-733 511-744-20 511-734 511-745-20 511-735 511-746-20 511-736
9 pcs. 6 pcs.
2 pcs.
1 pc.
4
Not supplied
11 pcs. 13 pcs. 6 pcs. 5 pcs. 9 pcs. 6 pcs. 6 pcs. 5 pcs. 9 pcs. 6 pcs. 11 pcs. 13 pcs. 11 pcs. 13 pcs.
4 pcs.
1 pc.
6
10.0 - 16.0 in /250 - 400 mm
Not supplied Not supplied
Not supplied
Not supplied
7 pcs.
10
1 pc.
Extension Rod Refer to page C-51. Dial protection cover, recommended indicators Refer to page C-52. Setting rings, Bore Gage Checker, i-Checker Refer to pages C-53 to C-58.
2 pcs.
1 pc.
4
Not supplied
2923AB-10 (Graduation: 0.0001 in)
4 pcs.
1 pc.
6
21DZA000
Not supplied
Not supplied
7 pcs.
10
1 pc.
2 pcs.
1 pc.
4
Not supplied
2922AB (Graduation: 0.0005 in)
4 pcs.
1 pc.
6
21DZA000
Not supplied
Not supplied
6 pcs. 5 pcs.
7 pcs.
10
1 pc.
2922AB
511-931-20 511-932-20 511-935-10
Set of 511-731 / 732 / 733
2923AB-10 543-312B
21DZA000
See SPECIFICATIONS of 511-731 / 732 / 733
* Accuracy of the bore gage alone. Note 1: A 2" sub-anvil is supplied with 511-733 , and a 3" sub-anvil is supplied with 511-736 . Note 2: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed).
Need Calibration?
C-37
Powered by FlippingBook