Micrometers
Snap Meters SERIES 523 • The snap meter with an external indicator enables accurate Go/No-go judgement without interruption. Pushing the retractable anvil button causes the anvil and pointer to move, enabling speedy measuremets.
Mounting example
• Select your preferred indicator. The measurement result can be externally output using an indicator with an output function. • Measuring faces: Carbide tipped.
B
ABS Digimatic Indicator
523-151 (Indicator: optional)
SPECIFICATIONS Inch
Gage stem dia 3/8
Range (in)
Anvil movement (in)
Measuring force* (N)
Repeatability of indication (in)
Flatness (in)
Parallelism (in)
Mass (g)
Order No.
Linear Gage and counter
523-151 523-152 523-153 523-154
0 - 1 1 - 2 2 - 3 3 - 4
710 810 920
0.000024
0.078
5 - 10
0.00002
0.000012
Typical indicators used with gage • ID-C (20 µinch): 543-702B (Ø3/8") • LG100 (5 µinch): 542-192 & Counter 542-075A & Conversion plug 21HZA195 Note: an adapter sleeve may be needed to adapt for Ø8mm stem OD (on probe) to Ø3/8" ID (on Snap Meter)
0.00004
1050
Metric
Gage stem dia 8mm
Range (mm) 0 - 25 25 - 50 50 - 75 75 - 100
Anvil movement (mm)
Measuring force* (N)
Repeatability of indication (μm)
Flatness (μm)
Parallelism (μm)
Mass (g)
Order No.
523-141 523-142 523-143 523-144
710 810 920
0.6
2
5 - 10
0.4
0.3
1
1050
* Measuring force before an indicator is mounted. Measured at the position where the anvil is retracted by 1 mm from the free position without installing the indicator. DIMENSIONS
Unit: mm
d 11.5
89.5
89
Range
Dial indicator (optional)
Work-stopper
Range (mm)
b
d
0 - 25 25 - 50 50 - 75 75 - 100
25 35 47 60
31 56 81
106
B-66
Powered by FlippingBook