MAC CAT-1006 FINAL

MEASURING INSTRUMENTS CATALOG CA-1006

Notes on Use Export Compliance

All products in this catalog are subject to the Foreign Exchange and Foreign Trade Control laws of Japan, US Export Administration Regulations (EAR) or the Canadian Export and Import Permits Act. Re-export or relocation of any of these products may require prior approval by an appropriate governing authority. If a purchased product is exported or re-exported, even if it is not considered a regulated item by a governing authority, Mitutoyo would like to be made aware, as the customer service available for that product may be affected. If you have any questions, please consult your local Mitutoyo sales office. Safety Caution Carefully read the specifications and functions in this catalog before selecting products. Safety may be compromised if you use products for purposes other than those stated here. Feel free to contact your nearest Mitutoyo sales center if you wish to use a product for other purposes or in a special environment. Appearance and Specifications Appearance and specifications are subject to change without prior notice for product improvement. The product names in this catalog are registered trademarks or trademarks of Mitutoyo or their respective companies.

Mitutoyo Precision Measuring Machines Trusted Throughout the World Table of Contents

Pages

Measurement Data Management

A-1 – 32

Linear Gages

G-1 – 19

Litematic

G-20

Mu-checker

G-21 – 25 G-26 – 29 G-30 – 34 G-35 – 44

Non-contact Sensors Laser Micrometers Laser Scan Micrometers

Micrometers

B-1 – 78

Micrometer Heads

B-79 – 124

H I

Digimatic Scale Units

H-1 – 6

Holtests

C-1 – 16 C-17 – 30 C-31 – 58

Quill Kit

H-7

Inside Micrometers

Linear Scales

H-8 – 24 I-1 – 16 I-17 – 40

Bore Gages

Profile Projectors

Microscopes

Calipers

D-1 – 46 D-47 – 62 D-63 – 82

Surftest

J-1 – 7

Height Gages Depth Gages

Contracer Formtracer Roundtest Roundtracer

J-8

J-9 – 20 J-21 – 24 J-25 – 28

Hardness Testing Machines

K-1 – 8

Gage Blocks Height Master Reference Gages

E-1 – 25 E-26 – 31 E-32 – 43 E-44 – 48

Rockwell Hardness Testing Machines K-9 – 13 Portable Hardness Testing Machines K-14 – 18

Granite Surface Plates

Coordinate Measuring Machines L-1 – L-12 Software and Probes L-13 – 18 Accessories L-19 – 24

Digimatic Indicators

F-1 – 24 F-25 – 74 F-75 – 86 F-87 – 88

Dial Indicators

Dial Test Indicators Indicator Calibration

M N

Vision Measuring Systems

M-1 – 16

Thickness Gages

F-89 – 94 F-95 – 100 F-101 – 110

Caliper Gages & Tension Gages

Stands

INDEX

N-1 – 14

Mitutoyo North America Operations

Aurora 965 Corporate Blvd

Aurora, IL 60502 (888) 648-8869 M 3 Solution Center Calibration Lab Mitutoyo Institute of Metrology CT Lab Repair and Field Service

Mitutoyo America Corporation Corporate Headquarters Aurora, Illinois USA

Seattle

Mitutoyo America Corporation Established in 1963, Mitutoyo America Corporation has locations all across the United States and Canada, including corporate offices, sales offices, M 3 Solution Centers, calibration and repair laboratories, and research and development facilities. Mitutoyo America offers a full product line of precision measuring tools, instruments and equipment. Mitutoyo also provides comprehensive metrology services including product and technical support, state-of-the-art calibration and repair services, unmatched education and training programs and cutting-edge research and development. As the leading metrology company in the world, Mitutoyo is committed to future product development that applies breakthrough technologies to its full range of dimensional measurement tools, instruments and systems. With the belief that providing high-quality metrology goods and services to its customers will, in turn, allow its customers to provide high-quality product to theirs, Mitutoyo continues to develop the most accurate and advanced metrology equipment available, all of which are made in our own manufacturing facilities. ”Precision is our profession” is not just the company motto, but also the principle by which every Mitutoyo employee stands by when serving our customers.

*M 3 = Mitutoyo, Measurement, Metrology

Los Angeles

Mitutoyo Mexico Corporate Headquarters

Electrical Industry 15 Industrial Park, Naucalpan de Juárez, Mexico 53370 (0155) 5312-5612

One number to serve you better: Toll Free: 1-888-MITUTOYO (1-888-648-8869) (U.S. Inquiries Only)

Boston 753 Forest Street, Suite 110 Marlborough, MA 01752 M 3 Solution Center

*M 3 = Mitutoyo, Measurement, Metrology Mitutoyo tools and instruments can be seen and demonstrated conveniently at any one of eight Mitutoyo M 3 Centers nationwide. These centers are fully equipped featuring operational models of the latest Mitutoyo tools and instruments. By appointment or walk-in basis, product demonstrations at M 3 Solution Centers are carried out by our experienced, highly trained staff. Contact your Mitutoyo distributor or the Mitutoyo regional office near you for more information.

Charlotte 11515 Vanstory Drive, Suite 140

Huntersville, NC 28078 M 3 Solution Center

Cincinnati 6220 Hi-Tek Court Mason, OH 45040 M 3 Solution Center

*M 3 = Mitutoyo, Measurement, Metrology

asurement, Metrology

Ohio 8876 Beckett Road West Chester, Ohio 45069 Contract Part Programming and Contract Inspection

Montreal

Detroit 46850 Magellan Dr., Suite 100

Toronto

Boston

Novi, Michigan 48377 M 3 Solution Center

Detroit

Los Angeles 16925 East Gale Ave. City of Industry, CA 91745 M 3 Solution Center CT Lab Repair and Field Service Contract Part Programming and Contract Inspection Houston 4560 Kendrick Plaza Dr., Suite 120 Houston, TX 77032 M 3 Solution Center

Cincinnati

Charlotte

Birmingham

Houston

Seattle 1000 SW 34th Street, Suite G Renton, WA 98057 M 3 Solution Center CT Lab Toronto 2121 Meadowvale Blvd. Mississauga, Ontario Canada L5N 5N1 M 3 Solution Center Calibration Lab

Mitutoyo Canada Inc. Corporate Headquarters 2121 Meadowvale Blvd. Mississauga, Ontario Canada (905) 821-1261

Montréal 7075 Place, Robert-Joncas, Suite 129 Montreal, Quebec Canada H4M 2Z2 (514) 337-5994 M 3 Solution Center Repair and Field Service

iii

Company Profile

M³ Solution Centers Experience all Mitutoyo precision instruments, tools, equipment, services and more at Mitutoyo M³ Solution Centers located across the United States. Each Mitutoyo M³ Solution Center is staffed with highly skilled and experienced Mitutoyo application engineers and product specialists available to answer any questions you may have regarding Mitutoyo products and services. The Mitutoyo application engineers also provide hands-on demonstrations, offer training on all Mitutoyo tools, instruments and equipment, and can work with you to develop application-specific measurement solutions. Customer Service & Sales Support The dedication at Mitutoyo America Corporation goes well beyond manufacturing and providing the most comprehensive line of precision metrology products. The Mitutoyo customer service and sales support group ensures fast, dependable responses to all product-related questions and needs. Mitutoyo customer service representatives are friendly and knowledgeable, providing product specifications, availability, and pricing as well as recommending a local authorized Mitutoyo distributor when you need it over the phone or via email. Technical Support Services The Mitutoyo America Corporation Technical Support team is a nationwide group of product and software specialists who are just a phone call or email away. This dedicated team walks customers through instrument setup and helps troubleshoot measurement and software issues with years of knowledge and experience. This rapid, first-hand expertise shortens downtime, keeps measurement data traceable, and ultimately protects the precision measurement tools and software you rely on by ensuring your tools stay accurate and productive. Software Application Training

To maximize the value of Mitutoyo precision instrument purchases, Mitutoyo America Corporation provides customized training for all Mitutoyo CMM, Vision, Form, and data management software (MeasurLink®) applications. Highly trained software instructors provide hands-on, one-on-one and group training with content appropriate for all customer needs. Training classes can be arranged at each of the Mitutoyo M³ Solution Centers located across the United States.

Mitutoyo Calibration Services The US-based Mitutoyo Calibration Lab is A2LA accredited (certificate #0750.01) with ISO/IEC 17025 accreditation as proof Mitutoyo Calibration Services deliver uncompromising, unmatched calibration precision at the micron level. With two A2LA accredited calibration labs in the US, one in Aurora, IL, and the other in City of Industry (LA), CA, Mitutoyo is the most trusted provider of metrology tool, instrument, and equipment calibration in the nation, with the broadest dimensional-calibration capabilities to be found anywhere. Utilizing state-of-the-art measurement technologies, Mitutoyo can calibrate virtually any metrology tool. Our highly trained, accredited calibration technicians provide

calibration services with NIST-traceable accuracy for any Mitutoyo metrology product along with other manufacturer’s gages and gage blocks. Each instrument Mitutoyo America Corporation calibrates is returned with certification to prove your measuring instruments and equipment are as accurate as possible and audit ready. The Mitutoyo Canada Calibration Lab is CLAS accredited to ISO/ISE 17015 as well. Field Service Mitutoyo Field Services features highly trained and capable engineers who perform on-site installation, repairs, and A2LA-accredited calibration of all Mitutoyo precision measurement instruments and equipment. Members of the US-based Field Services team can get equipment back into production quickly and can certify calibration on any service visit by performing multi-point checks against NIST-traceable artifacts and issue certificates of calibration. Mitutoyo Field Services turns the potential logistical headache of crating and shipping critical measurement equipment for repair or calibration, and waiting for it to return, into a seamless, audit-ready on-site process. Service agreements are available at the time of equipment purchase. The Mitutoyo Canada Field Service team is also CLAS accredited to ISO/IEC 17025. Repair Services Highly skilled technicians in the US-based Mitutoyo Repair Services department are capable of repairing the full range of Mitutoyo precision tools and instruments. These repairs are done in-house in either the Aurora, IL, or City of Industry, CA, facilities, and are backed by a full 90-day warranty. When repairs are complete, the Repair Services team then runs the repaired instrument through the same NIST-traceable accuracy checks that are performed on newly produced Mitutoyo instruments at the factory. Repair services are also available from Mitutoyo Canada. Parts Center The Mitutoyo America Corporation parts center stocks more than 10,000 individual parts for Mitutoyo products. Same day and 24-hour shipping is available for most part requests. For CMM parts, a specialized group is available to provide additional CMM support services. A Mitutoyo product parts catalog is available via download from mitutoyo.co.jp.

Company Profile

Mitutoyo Institute of Metrology The Mitutoyo Institute of Metrology is dedicated to advancing the knowledge and skills of professionals in dimensional metrology with a combination of in-person classes, virtual training, on-demand eLearning modules, and customized on-site programs. The Mitutoyo Institute of Metrology offers a wide range of courses that cover everything from the fundamentals of measurement and GD&T to advanced CMM programming, form measurement, and statistical process control (SPC). Courses are designed and taught by experienced metrologists and application engineers; many of whom helped write industry standards or develop the software used in today’s labs and shop floors.

The courses and training at the Mitutoyo Institute of Metrology are the best place to learn how to operate the measurement instruments and equipment properly, interpret results confidently and apply measurement principles to real-world manufacturing challenges. The Institute also plays a crucial role in helping quality professionals, engineers, and technicians stay current and competent on new technologies as they evolve more rapidly than ever. For companies, this means fewer measurement errors, stronger audit readiness, and a more capable workforce that can fully leverage the value of their investment in Mitutoyo equipment. CT Lab/MEI (R&D and Software Development)

The Mitutoyo America Corporation CTLabs and Micro Encoder Inc. are part of an international network of Mitutoyo research and development facilities charged with developing breakthrough technologies for the full range of Mitutoyo dimensional measurement tools, instruments, systems, and the advancement of the field of metrology. Highly skilled developers and engineers utilize cutting-edge development tools to produce the most advanced and sophisticated metrology software and equipment available. Mitutoyo America Corporation is a Microsoft® Gold Certified Partner, providing the entire organization access to a host of Microsoft® development tools and support to ensure Mitutoyo software applications work reliably in Microsoft® OS and network environments.

Mitutoyo Custom Solutions Mitutoyo Custom Solutions is a specialized engineering and integration service that designs, builds, and supports custom measurement systems tailored to the unique needs of complex manufacturing environments. While Mitutoyo offers the broadest catalog of off-the-shelf metrology tools in the market, not every quality measurement challenge is found in an off-the-shelf box. The Custom Solutions team

My.Mitutoyo.com is the Mitutoyo America Corporation online customer support and self-service portal, designed to give users easy access to essential resources for managing Mitutoyo instruments and software. My.Mitutoyo empowers users with 24/7 access to critical product and support information, reducing dependency on phone/email support queues and giving quality and maintenance teams more control over their equipment lifecycle, and assistance when it’s needed every hour of every day. My.Mitutoyo streamlines administrative and compliance tasks by making service history and calibration records easily accessible. It also reduces downtime by simplifying how users get support or documentation for the tools they depend on daily. My.Mitutoyo also plays an important role in proactive maintenance planning and quality system compliance. For organizations operating under ISO 9001, IATF 16949, or AS9100 standards, having instant access to digitally stored calibration certificates, service records, and product documentation supports smoother audits and ensures traceability without the burden of physical paperwork. Users can track calibration due dates, view historical service timelines, and even reference previous technical support interactions to ensure gages and instruments are up to date and performing to spec. Mitutoyo customers can also register newly purchased tools on My.Mitutoyo which activates warranty coverage and make certain they receive timely notifications about updates, product advisories or service reminders relevant to that specific model of gage or instrument. Since My.Mitutoyo is integrated with the Mitutoyo technical support team, support tickets through the portal are routed more efficiently to the right technical support service team for faster turnaround and better case tracking. My.Mitutoyo acts as a central hub where customers can: • Register products for warranty and support • Download software updates, drivers, and manuals • Find the nearest authorized Mitutoyo dealer • Access calibration certificates (for tools that have been serviced by Mitutoyo) • View and manage service requests

works directly with customers to understand the part geometry, tolerance requirements, workflow constraints, and automation goals, and then engineer tailored systems to solve this problem. This

specialized team of application engineers can integrate anything from sensors, fixtures, stages, software, and data collection into existing production lines or automated cells to deliver a custom turnkey solution. Contract Part Programming Mitutoyo America Corporation features highly trained, experienced team of programmers to help when you need part-programming assistance. From small revisions to major projects, the Mitutoyo Programming Team increases part programming precision and equipment efficiency, enabling the development of

custom measurement programs specifically tailored to individual workpieces and applications. Trust the Mitutoyo experts to deliver the right programming optimizations and efficiency in your measurement process. Contract Inspection

Mitutoyo America Corporation has three state-of-the-art facilities that provide accredited contract inspection services for your parts. Mitutoyo utilizes our own high-

end, ultra-precise measuring equipment in our ISO/IEC 17025 accredited inspection labs, one in West Chester north of Cincinnati, OH, one just east of Los Angeles in City of Industry, CA, and one in Aurora, IL, for accredited measurement of your parts.

No matter how complex your parts are, Mitutoyo will inspect them utilizing the most sophisticated measuring equipment available. We provide all types of contract inspection services including CMM, Vision, Surface, Form, and Roundness inspections to help you achieve accurate part measurements. With access to cutting- edge measurement technologies and high-precision solutions, Mitutoyo Contract Inspection services meet rigorous quality control demands without requiring significant upfront investment.

• Submit support tickets or technical questions • Browse FAQs and troubleshooting guides

vii

Meaning of Symbols

ABSOLUTE Linear Encoder

This is an electronic measuring scale that provides a direct readout of ABSOLUTE linear position when switched on, without needing to be zeroed or reset. Mitutoyo measuring instruments incorporating these scales provide the significant benefit of being always ready for measurement without the need of preliminary setting after switching on. There are three types of ABSOLUTE linear encoders depending on whether the method used is electrostatic, electromagnetic, or optical. They are widely used in various measuring instruments as measuring systems endowed with enhanced reliability of measured values. Advantages: 1. No count error occurs even if you move the slider or spindle extremely rapidly. 2. You do not have to reset the system to zero when turning on the system after turning it off *1 . 3. As this type of encoder can drive with less power than the incremental encoder, the battery life is prolonged to about 5 years (continuous operation of 18,000 hours) *2 under normal use. *1 Unless the battery is removed. *2 In the case of ABSOLUTE Digimatic calipers and ABSOLUTE coolant proof calipers.

is a trademark of

Mitutoyo Corporation.

IP Codes

These are codes that indicate the degree of protection provided (by an enclosure) for the electrical function of a product against the ingress of foreign bodies, dust and water as defined in IEC standards (IEC 60529: 2013) and JIS C 0920: 2003. [IEC: International Electrotechnical Commission]

IP □□ □ (Supplementary letter) (IP: International Protection)

Degrees of protection against solid foreign objects Brief description Definition

Degrees of protection against water

Degrees of protection against oil Abstract

First characteristic numeral

Second characteristic numeral

Supplementary letter

Brief description Definition

0 1

Unprotected

—

Drops or splashes of oil from any direction cause no harmful effects. Protection against entry of oil droplets or splashes from all directions.

0 1

Unprotected —

A Sø50 mm object probe shall not fully penetrate enclosure* A Sø12.5 mm object probe shall not fully penetrate enclosure* A Sø2.5 mm object probe shall not fully penetrate enclosure* A Sø1.0 mm object probe shall not fully penetrate enclosure* Ingress of dust is not totally prevented, but dust that does penetrate must not interfere with satisfactory operation of the apparatus or impair safety.

Protected against solid foreign objects of Sø50 mm and greater Protected against solid foreign objects of Sø12.5 mm and greater Protected against solid foreign objects of Sø2.5 mm and greater Protected against solid foreign objects of Sø1.0 mm and greater

Vertically falling water drops shall have no harmful effects.

Protected against vertical water drops Protected against vertical water drops within a tilt angle of 15° Protected against spraying water Protected against splashing water Protected against water jets Protected against powerful water jets Protection against water penetration

Oil- resistant

Vertically falling water drops shall have no harmful effects when the enclosure is tilted at any angle up to 15° on either side of the vertical. Water sprayed at an angle up to 60° either side of the vertical shall have no harmful effects. Water splashed against the enclosure from any direction shall have no harmful effects. Water projected in jets against the enclosure from any direction shall have no harmful effects. Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time. Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for IPX7.

Oil- proof

The protection levels against oil are specified only in the appendix of JIS C 0920.

is a trademark of Mitutoyo Corporation. The numerals and letters indicate protection levels.

Protected against dust

6 No ingress of dust allowed. * The full diameter of the object probe shall not pass through an opening of the enclosure. For details of the test conditions used in evaluating each degree of protection, please refer to IEC 60529 (JIS C 0920). Dust-proof

Protected against the effects of continuous immersion in water

viii

Digimatic S1

The proprietary Mitutoyo bidirectional serial communication protocol enables a connected PC to execute measurement data output, setting and control of a measuring instrument, and capture of information of a specific measuring instrument.

TÜV Rheinland certification marks

All products with the marks shown on the left have passed the IP test carried out by the German accreditation organization, TÜV Rheinland.

Measuring Instruments Shipped with Inspection Certificate

Mitutoyo guarantees product quality as a leading precision measuring instrument manufacturer and ships measuring instruments with an inspection certificate that includes inspection data so that customers can use them with confidence. Mitutoyo also calibrates the purchased measuring instruments and issues a calibration certificate, for a fee, that proves traceability to the relevant standard. Note: For the meaning of the inspection marks shown at left, refer to the detailed description of each product.

MeasurLink ® ENABLED marks

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink ® . MeasurLink ® is a registered trademark of Mitutoyo Corporation in Japan and Mitutoyo America Corporation in the United States.

Installation of Main Unit Startup System

As a part of the enhancement of our export control system, the large CNC measuring machines (all the CNC Coordinate Measuring Machines, Vision Measuring Systems, and Form Measuring Machines) are now equipped with a Main Unit Startup System (relocation detecting system) before export. This system is designed to take a machine out of operation upon detecting the mechanical shock that accompanies relocation. If you intend to relocate a measuring machine fitted with this system, please contact us beforehand so that our service engineers can assist you. However, the system may be triggered in the event of a natural event such as a powerful earthquake. In this case, our service engineers will deal with the situation at the earliest opportunity.

Main Unit Startup System

Got Questions?

Calibration Laboratories Worldwide

Mitutoyo has built a network for comprehensive calibration support of precision measuring products in the global market. To provide calibration services on a global scale, Mitutoyo has gained ISO/IEC 17025 certification from the accreditation body in each country, and has issued calibration certificates carrying the mark of each accreditation body. In addition, the calibration certificates issued by each calibration laboratory are mutually recognized in the countries and commercial areas signed in the MRA (Mutual Recognition Arrangement) of ILAC (International Laboratory Accreditation Cooperation) and APAC (Asia Pacific Accreditation Cooperation), or the MLA (Multilateral Agreement) of EA (European co-operation for Accreditation).

Japan

Singapore

Malaysia NML- SIRIM

Indonesia

Thailand

Vietnam

India

Taiwan NML R.O.C.

Korea

China

USA

National metrology institute

NMIJ, AIST

Puslit KIM-LIPI

NMC, A*STAR

VMI- STAMEQ

NIST

KRISS

NIMT

NIM

NPLI

ILAC 〈 MRA 〉

IAJapan, NITE (JCSS)

Accreditation body

APAC 〈 MRA 〉

Standards Malaysia

A2LA

KAN

NABL

TISI

KOLAS

CNAS

SAC

BoA

TAF

Accredited calibration Mitutoyo laboratory

• Japan AIST

• Korea KRISS

: National Institute of Advanced Industrial Science and Technology

: Korea Research Institute of Standards and Science

NMIJ

: National Metrology Institute of Japan : International Accreditation Japan

KOLAS

: Korea Laboratory Accreditation Scheme

IAJapan

• China NIM

NITE JCSS

: National Institute of Technology and Evaluation

: National Institute of Metrology

: Japan Calibration Service System

CNAS

: China National Accreditation Service for Conformity Assesment

• Singapore NMC, A*STAR : National Metrology Centre/Agency for Science, Technology and Research SAC : Singapore Accreditation Council • Malaysia NML-SIRIM : National Metrology Laboratory-Standards and Industrial Research Institute of Malaysia Standards : Standards Malaysia Malaysia • Indonesia Puslit KIM-LIPI : Research Center for Calibration, Instrumentation and Metrology- Indonesian Institute of Science KAN : Komite Akreditasi Nasional • Thailand NIMT : National Institute of Metrology (Thailand) TISI : Thai Industrial Standard Institute • Vietnam VMI-STAMEQ : Vietnam Metrology Institute, Directorate for Standards and Quality BoA : BUREAU OF ACCREDITATION • India NPLI : National Physical Laboratory of India NABL : National Accreditation Board for Testing and Calibration Laboratories • Taiwan NML R.O.C.: National Measurement Laboratory R.O.C. TAF : Taiwan Accreditation Foundation

• U.S.A. NIST

: National Institute of Standards and Technology : American Association for Laboratory Accreditation

A2LA

• Canada NRC

: National Research Council Canada/Institute for National Measurement Standards : Calibration Laboratory Assessment Service/Standards Council of Canada

SCC

• Mexico CENAM

: Centro Nacional de Metrología : Entidad Mexicana de Acreditación , a.c.

ema

• Germany PTB

: Physikalisch-Technische Bundesanstalt : Deutsche Akkreditierungsstelle GmbH

DAkkS

• U.K. NPL

: National Physical Laboratory

UKAS

: United Kingdom Accreditation Service

• France LNE

: Laboratorie national de metrologie et d’essaias

Cofrac

: Comité français d'accréditation

Note: The above are domestic and international locations where Mitutoyo provides ISO/IEC 17025 accredited calibration services. (As of July, 2024)

Canada Mexico

Germany

U.K.

France

Italy

The Netherlands

Sweden

Switzerland

Poland

Czech Republic

Hungary

Romania

Brazil

Argentina

NPL

LNE

PTB

VSL

RISE

GUM

CMI

BFKH

INM

NRC

CENAM

INRIM

METAS

INMETRO

INTI

EA 〈 MLA 〉

ema

DAkkS

UKAS

Cofrac

ACCREDIA

RvA

SWEDAC

SAS

PCA

CIA

NAH

RENAR

Cgcre

OAA

SCC

• Italy

• Brazil INMETRO : Instituto Nacional de Metrologia Qualidade e Tecnologia Cgcre : Coordenação Geral de Acreditação do INMETRO • Argentina INTI : Instituto Nacional de Tecnologia Industrial OAA : Organismo Argentino de Acreditación

INRIM : Istituto Nazionale di Ricerca Metrologica ACCREDIA : L’ENTE ITALIANO DI ACCREDITAMENTO • The Netherlands VSL : Van Swinden Laboratorium RvA : Raad voor Accreditatie • Sweden RISE : RISE Research Institutes of Sweden AB SWEDAC

: Swedish Board for Accreditation and Conformity Assessment

• Switzerland METAS

: The Federal Institute of Metrology

SAS

: Swiss Accreditation Service

• Poland GUM

: Główny Urząd Miar - the National Metrology Institute in Poland

PCA

: Polskie Centrum Akredytacji

• Czech Republic CMI

Certificate of A2LA accredited laboratory (Mitutoyo America in U.S.A.)

: Český Metrologický Institut : Český Institut pro Akreditaci

CIA

Certificate of DAkkS accredited laboratory (Mitutoyo Deutschland in Germany)

Cerificate of SAC accredited laboratory (Mitutoyo Asia Pacific in Singapore)

• Hungary BFKH

: Government Office of the Capital City Budapest

NAH

: Nemzeti Akkreditáló Hatóság

• Romania INM

: Institutul National de Metrologie : Asociaţia de Acreditare din România

RENAR

ILAC : International Laboratory Accreditation Cooperation APAC : Asia Pacific Accreditation Cooperation MRA : Mutual Recognition Arrangement EA : European co-operation for Accreditation MLA : Multilateral Agreement

Certificate of Cgcre accredited laboratory (Mitutoyo Sul Americana in Brazil)

Certificate of RvA accredited laboratory (Mitutoyo Nederland in the Netherlands)

Certificate of CNAS accredited laboratory (Mitutoyo Measuring Instruments (Shanghai) in China)

Name of each National metrology institutes and Accreditation bodies are based on our survey. For the latest information, please refer to our website. https://www.mitutoyo.co.jp

Traceability of Mitutoyo Standards

Mitutoyo ensures and maintains traceability of various types of precision measuring instruments by holding standards of length and other physical quantities that are directly traceable to the national standards for use in calibrating the working standards used for the calibration of measuring instrument products supplied to industry. Furthermore, Mitutoyo offers a temperature calibration service which is indispensable for high-accuracy length measurement. The Mitutoyo traceability system with the optical frequency comb at the top level, ensuring performance equivalent to that of the Japan’s national standard, and the calibration technology supporting this system are the basis of highly accurate and reliable products offered to customers.

Certificate of JCSS accredited laboratory (Mitutoyo Standard Management Section)

Traceability of Length Field

Traceability of Temperature

National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ, AIST) 633 nm Stabilized He-Ne Laser (Surface profile measurement using the Fizeau Interferometer)

NMIJ, AIST Temperature fixed points <National Standard>

National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ, AIST) The atomic clock synchronized to UTC <National Standard>

Mitutoyo Standard Management Section (JCSS Accredited Cal. Lab. No. 0067) Frequency Standard Oscillator ( As a standard of optical frequency comb)

JEMIC Temperature fixed point

Mitutoyo Standard Management Section (JCSS Accredited Cal. Lab. No. 0067) 633 nm Iodine Stabilized He-Ne Laser

Mitutoyo Miyazaki Plant (JCSS Accredited Cal. Lab. No. 0030) 633 nm Iodine Stabilized He-Ne Laser

JCSS Accredited Cal. Lab. Temperature fixed point/ Platinum resistance thermometer

Mitutoyo Utsunomiya Calibration Center (JCSS Accredited Cal. Lab. No. 0031) 633 nm Stabilized He-Ne Laser

Mitutoyo Kawasaki Calibration Center (JCSS Accredited Cal. Lab. No. 0086) 633 nm Stabilized He-Ne Laser

Mitutoyo Miyazaki Plant 633 nm Stabilized He-Ne Laser

Mitutoyo Standard Management Section (JCSS Accredited Cal. Lab. No. 0067) Temperature fixed point (Triple point of water)/ Platinum resistance thermometer

Mitutoyo Utsunomiya Calibration Center (JCSS Accredited Cal. Lab. No. 0031) Standard Gauge Block

Mitutoyo Miyazaki Plant (JCSS Accredited Cal. Lab. No. 0030) Standard Gauge Block

Mitutoyo Hiroshima Calibration Center (JCSS Accredited Cal. Lab. No. 0109) Standard Gauge Block/ Micrometer Standard/Step Gage

Mitutoyo Sales and Service Division (JCSS Accredited Cal. Lab. No. 0186)

Mitutoyo Utsunomiya Calibration Center (JCSS Accredited Cal. Lab. No. 0031) Standard Gauge Block/ Micrometer Standard/Step Gage

Mitutoyo Kawasaki Calibration Center (JCSS Accredited Cal. Lab. No. 0086) Standard Gauge Block/Micrometer Standard/Step Gage/ Coordinate Measuring Machines

Reference Flat

Standard Gauge Block/Step Gage/ Standard Scale/ Roughness specimen/633 nm Stabilized He-Ne Laser

Flatness Measuring Interferometer

Working Standard

Laser Length Measuring Machine

Optical Flat/ Optical Parallel

Step Gage

Gauge Block

Ring Gage

Dial Indicator Tester

Standard Scale

Measuring Instrument

Coordinate Measuring Machines

Vision Measuring Systems

Surface Roughness Testers

Small Tool Instruments

Precision Sensors

Form Measurement

Optical Measuring

Thermometer

Scale Units

Note: This chart shows a simplified traceability system of a part of Mitutoyo products. Detailed traceability charts are published for each product. (As of July, 2024) For the latest information, please refer to our website. https://www.mitutoyo.co.jp

xii

Traceability of Hardness Field

National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ, AIST) <National Standard>

Mitutoyo Hiroshima Calibration Center (JCSS Accredited Cal. Lab. No. 0109) Rockwell Hardness Reference Blocks/ Vickers Hardness Reference Blocks

Mitutoyo Standard Management Section (JCSS Accredited Cal. Lab. No. 0067) Frequency Standard Oscillator (As a standard of optical frequency comb)

Mitutoyo Standard Management Section

Mitutoyo Miyazaki Plant (JCSS Accredited Cal. Lab. No. 0030) 633 nm Iodine Stabilized He-Ne Laser

ISO/IEC 17025 Accredited Cal. Lab. Length−proving Instruments (Laser system)

(JCSS Accredited Cal. Lab. No. 0067) 633 nm Iodine Stabilized He-Ne Laser

JCSS Accredited Cal. Lab. Force-proving Instruments

JCSS Accredited Cal. Lab. Reference Weights

Mitutoyo Utsunomiya Calibration Center (JCSS Accredited Cal. Lab. No. 0031) 633 nm Stabilized He-Ne Laser

Mitutoyo Miyazaki Plant 633 nm Stabilized He-Ne Laser

Force Measuring Machine

Depth Inspection Device

Gauge Block

Standard Scale

Non-automatic Balance

Standard Hardness Testing Machine for calibrating hardness reference blocks

Mitutoyo Sales and Service Division (JCSS Accredited Cal. Lab. No. 0186) Rockwell Hardness Reference Blocks/ Vickers Hardness Reference Blocks

TEST Equipment

Hardness Testing Machines

Video

xiii

Response to Safety and Environmental Protection Regulations

UKCA Marking UKCA marking indicates that the products conform to the applicable requirements for products sold in Great Britain. Response to WEEE Directive The WEEE Directive* 1 is a directive that mandates appropriate collection and recycling of electrical and electronic equipment waste. The purpose of this directive is to increase the reuse and recycling of these products. To differentiate between equipment waste and household waste, a crossed-out wheeled-bin symbol is marked on a product. *1 WEEE Directive: Directive 2012/19/EU of the European Parliament and of the Council on waste electrical and electronic equipment. Response to REACH Regulation REACH Regulation* 2 is a regulation governing registration, evaluation, authorization and restriction of chemical substances in Europe, and all products such as substances, mixtures and molded products (including accessories and packaging materials) are regulated. Chemical substances scientifically proven to be substances that are hazardous to human health and the global environment (Candidate List of substances of very high concern for Authorisation (CLS)) are prohibited to be sold or information concerning them disclosed is mandated in Europe. We will actively disclose information about our products and provide replacement if we find our products contain any of the listed substances. *2 REACH Regulation: Regulation (EC) No1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorization and Restriction of Chemicals Response to Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Product (China RoHS 2) We set the environmental protection use period regulated by China RoHS 2 per product and label with the marks shown on the right, together with a list of the contained substances. *3 The environmental protection use period does not indicate the product warranty period. "Environmental Protection Use Period" mark* 3

To deliver safe and reliable products to our customers, Mitutoyo evaluates its products to ensure that they adhere to applicable product safety and environmental standards, including CE marking. CE Marking CE marking indicates that a product complies with the essential requirements of the relevant European health, safety and environmental protection legislation.

Conformity evaluation for CE marking (EMC Directives)

Major applicable Directives relating to Mitutoyo products Applicable Directives Applicable range

At least one part of a machine that may cause injury to the human body if it moves due to movement of an actuator such as a motor. A product that may produce electromagnetic radiation or which is influenced by electromagnetic radiation from outside. Equipment (device) that uses AC voltage of 50 to 1000 V or DC voltage of 75 to 1500 V. All electrical and electronic equipment that intentionally transmits and receives radio waves at frequencies below 3000 GHz. Restriction of the use of certain hazardous substances in electrical and electronic equipment. Restricted substances and maximum concentration values tolerated by weight: · Lead (0.1%) · Cadmium (0.01%) · Mercury (0.1%) · Hexavalent chromium (0.1%) · Polybrominated biphenyls (PBB) (0.1%) · Polybrominated diphenyl ethers (PBDE) (0.1%) · Bis (2-ethylhexyl) phthalate (DEHP) (0.1%) · Butyl benzyl phthalate (BBP) (0.1%) · Dibutyl phthalate (DBP) (0.1%) · Diisobutyl phthalate (DIBP) (0.1%) Note: Our products fall under Cat.9 “Monitoring and control instruments including industrial monitoring and control instruments”.

Machinery Directive

EMC Directive (Electromagnetic Compatibility Directive)

Low Voltage Directive

Radio Equipment Directive

RoHS Directive

xiv

Precautions to be taken when handling button cells

• Do not solder directly to a battery. • Ensure batteries are inserted without coming into contact with metal parts of equipment. • In case of disposal, insulate (+) and (-) terminals of a battery by applying an insulating material. WARNING Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

• KEEP batteries OUT OF REACH OF CHILDREN, ingestion can cause DEATH or serious injury. Seek immediate medical attention if you suspect that a battery is swallowed or inserted inside any part of the body. • Do not dismantle, heat or throw the battery in a fire. • If alkaline solution leaks from the battery and contacts your skin or clothes, immediately wash the affected area with water. IF IN EYES, immediately rinse eyes cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing and summon immediate assistance from a doctor.

CAUTION

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

• Do not try to charge the battery as it is not chargeable. Install the battery with correct polarity. Failure to do so can cause battery leakage or burst resulting in damage to the instrument or personal injury.

NOTICE

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

• Do not use new and used batteries together. Do not use different types of batteries together. • Do not use nor leave batteries in direct sunlight nor in locations subject to high temperature or humidity.

• Avoid letting batteries contact water. • Remove batteries from equipment that will not be used for a prolonged period.

Follow the regulations of each country when disposing of batteries.

Got Questions?

Traceability Mitutoyo North America

0750.01

Traceability is an essential requirement for all measurements. At Mitutoyo, we consider providing traceability to our customers to be a critical part of our business. Traceability is often referred to as a ”chain of comparisons,” and that chain always starts with a precise definition. For length measurements, the meter is defined by how far light moves in a vacuum in a defined amount of time. The job of reducing that definition into a practical measurement belongs to the world’s National Metrology Institutes (NMI). The NMI in the United States is the National Institute of Standards and Technology (NIST), where they realize and transfer the definition of length to physical measurements of gage blocks, line scales, and other primary standards. From there, traceable measurements at other laboratories and factories are possible. Mitutoyo factories and calibration labs regularly send their standards to NIST; however, traceability can also be established through other recognized NMIs, such as the National Metrology Institute of Japan (NMIJ). The world’s leading NMIs, such as NIST and NMIJ, routinely participate in intercomparisons to ensure global traceability to the same unit of length.

The requirements for demonstrating traceability vary from industry to industry. In the past, some industries required NIST test numbers, but that practice is now obsolete and has been replaced in many industries by the much more demanding requirement of ISO 17025 accreditation. To meet these needs, Mitutoyo America offers our customers A2LA-accredited calibrations either in our labs (Certificate 0750.01), or at your facility (Certificate 0750.01). None of our competitors can match the range and accuracy of accredited calibration services offered by Mitutoyo. Not every quality system requires accreditation, and for the less demanding needs, our standard factory issued certificates can still be used to ensure the required traceability. Whatever the measurement, whatever the requirements for traceability, Mitutoyo has the most technically advanced metrology products and calibration services to meet your specific needs.

xvi

Measuring instruments that include a certificate of inspection

As part of quality assurance, Mitutoyo will attach data at the time of factory shipment* 1 to the products listed in page 14-10.* 2 Also, if calibration of the measuring instrument is requested at the time of purchase, we will issue, at a separate charge, an inspection certificate that proves traceability with the reference gage. If you wish to request calibration, please contact your local Mitutoyo sales office. *1 For some products whose purchase date cannot be identified, the inspection data at the time of factory shipment cannot be used in the inspection certificate. For details, please contact your local Mitutoyo sales office. *2 The products are listed in the series name. There are some models that will not be accompanied with an inspection certificate.

• For the details of the inspection items to be included in the inspection certificate, please contact your local Mitutoyo sales office. • If you have a request on inspection items, contact your local Mitutoyo sales office.

Products Name

Page

Products Name

Page

Inch/Metric Rectangular Gage Block Sets Micrometer Inspection Gage Block Sets

High-performance ABS Digimatic Indicator ID-FNX

E-6 to E-8

F-3 F-5 F-7 F-9

E-9 Individual Inch/Metric Rectangular Gage Blocks E-10 to E-12 Gage Blocks with a Calibrated Coefficient of Thermal Expansion E-13 ZERO CERA Blocks (Ultra-low Thermal Expansion) E-13 Inch/Metric Square Gage Block Sets E-17 to E-18 Individual Inch/Metric Square Gage Blocks E-19 to E-20 Step Master E-24 Gage Block Comparator GBCD-100A E-25 Gage Block Comparator GBCD-250 E-25

ABSOLUTE Digimatic Indicator ID-CNX ABSOLUTE Digimatic Indicator ID-N/B ABSOLUTE Digimatic Indicator ID-SX2 ABSOLUTE Digimatic Indicator ID-U ABSOLUTE Digimatic Indicator ID-CAX (Peak-Value Hold Type)

F-11

Gage Blocks

Digimatic Indicators

F-13

ABSOLUTE Digimatic Indicator ID-CGX (Bore Gage Type) ABSOLUTE Digimatic Indicator ID-CRX (Calculation Type)

F-15 F-17

ABSOLUTE Digimatic Indicator ID-CJX (Signal Output Function Type)

F-20

Digimatic Indicator ID-H

F-22 F-26

Height Master

E-26 E-27 E-28 E-29 E-30 E-32 E-32 E-33 E-47

Dial Indicators

Digital Height Master

Height Masters, Check Masters

Dial Test Indicators Indicator Calibration

Riser Blocks

Dial Test Indicators

F-75

Universal Height Master

i-Checker

F-87 F-88

Check Master Standard Scales

UDT-2 Calibration Tester

Digimatic Holtest

C-3 C-7

Working Standard Scales High Precision Square Black Granite Surface Plates

Reference Gages

Holtest

Inside Measuring Instruments

Holtest (Type II)

C-11 C-13 C-30

ABSOLUTE Borematic

Ultra-high Accuracy Digimatic Micrometer High-speed and High-accuracy Digimatic Micrometer QuantuMike

B-3

CERA Inside Micro Checker

B-5

Hardness Testing Machines

Micrometers (only for models with the range of 0 - 25 mm and 25 - 50 mm)

Rebound Type Portable Hardness Tester (HH-V400)

K-14

Coolant Proof Micrometers Digimatic Outside Micrometers

B-7

Linear Gages

High-accuracy/resolution Linear Gage LGH

G-9

B-10 B-16 B-17 B-18

Linear Scales AT Series Linear Scales ST Series

H-13 H-19 M-3

Outside Micrometers

Linear Scales

Ratchet Thimble Micrometer

Quick Vision

Outside Micrometers

CNC Vision Measuring Machine with Micro-form Scanning Probe (MiSCAN Vision System)

M-7

IP67 ABSOLUTE Coolant Proof Caliper

D-3 D-5 D-8

Vision Measuring Systems

ABSOLUTE Digimatic Caliper

Calipers

Micro-form Measuring System UMAP

M-9

Dial Caliper Linear Height

QUICK SCOPE QUICK IMAGE

M-13 M-14

High Precision Height Measuring Tools

D-49

SURFTEST

J-3 J-8 J-9

QM-Height

D-51

CONTRACER FORMTRACER ROUNDTEST ROUNDTRACER

Caliper/Height Gage Checker Depth Gages

CERA Caliper Checker

D-62

Form Measuring Systems

D-68

Depth Micro Checker

J-21 J-25

Micro Vickers Hardness Testing Machine Vickers Hardness Testing Machine

K-4 K-6

Hardness Testing Machines

Rockwell Hardness Testing Machine K-9 Note: Some products mentioned above will not be accompanied with an inspection certificate as standard.

xvii

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200