Imperial Bi-Metal 100 Band Saw Blade. For cutting tough and abrasive materials. These blades are designed primarily for use on cut-off machines with coolant systems, and with power feed. However, they may also be used effectively on contour machines with or with- out coolant systems, especially on difficult to machine steels. • M2 high-speed steel cutting edge • Fully hardened and multiple tempered • Available in Raker and Wave set • Available in Precision and Claw Tooth • Widths from 1/4 in. to 2 in. (6.35-50.8 mm). • Best combination of hardness, toughness and wear resistance
Available in widths as narrow as 1/4 in. (6.35 mm), the Imperial Bi-Metal 100 will follow close radii in contour sawing operations.
Imperial Bi-Metal 100 Saw Blade Narrow Width-100-Foot (30.5 m) Coils In Containers Precision Width Gage Nominal Set Type Catalog In. mm In. mm Pitch In. mm Set No. 1/ 4 6.35 .035 0.89 10 .058 1.47 R 303-008 1/ 4 6.35 .035 0.89 14 .057 1.45 R 303-009 3/8 9.5 .035 0.89 6 .058 1.47 R 303-011 3/8 9.5 .035 0.89 8 .060 1.52 R 303-012 3/8 9.5 .035 0.89 10 .058 1.47 R 303-016 3/8 9.5 .035 0.89 14 .057 1.45 R 303-013 1/2 12.7 .025 0.64 10 .044 1.12 R 303-017 1/2 12.7 .025 0.64 14 .043 1.09 R 303-019 1/2 12.7 .035 0.89 6 .058 1.47 R 303-020 1/2 12.7 .035 0.89 10 .058 1.47 R 303-018 1/2 12.7 .035 0.89 14 .057 1.45 R 303-025 R= Raker Imperial Bi-Metal 100 Saw Blade Wide Width-150-Foot (46 m) Coils In Containers Precision Width Gage Nominal Set Type Catalog In. mm In. mm Pitch In. mm Set No. 3/4 19 .035 0.89 6 .058 1.47 R 303-021 3/4 19 .035 0.89 8 .058 1.47 R 303-022 3/4 19 .035 0.89 10 .058 1.47 R 303-023 3/4 19 035 0.89 10 .063 1.60 w 303-351 3/4 19 .035 0.89 14 .063 1.60 w 303-353 1 25.4 .035 0.89 3 .058 1.47 R 303-859 1 25.4 .035 0.89 4 .060 1.52 R 303-024 1 25.4 .035 0.89 6 .058 1.47 R 303-123 1 25 4 .035 0.89 8 .058 1.47 R 303-222 1 25.4 .035 0.89 10 .058 1.47 R 303-321 1 25.4 .035 0.89 6 .080 2.03 w 303-370 1 25.4 .035 0.89 8 .080 2.03 w 303-388 1 25.4 .035 0.89 -- 10 .063 1.60 w 303-325 1-1 / 4 32 .042 1.07 3 .065 1.65 R 303-800 1-1 / 4 32 .042 1.07 4 .065 1.65 R 303-401 1-1/ 4 32 .042 1.07 6 .065 1.65 R 303-402 1-1/ 4 32 .042 1.07 8 .065 1.65 R 303-403 1-1/ 4 32 .042 1.07 10 .065 1.65 R 303-404 1-1/ 4 32 .042 1.07 6 .080 2.03 w 303-406 - 1-1/2 38 .050 1.27 8 .080 2.03 R 303-446 1-1 / 2 38 .050 1.27 -- 10 .080 2.03 R 303-453 2 51 .050 1.27 4 .080 2.03 R 303-413 2 51 .050 1.27 6 .080 2.03 R 303-414 --- R= Raker W = Wave
The versatile Imperial Bi-Metal 100 is a long-lasting blade for a wide variety of materials.
DoALL's Imperial Bi-Metal 100 is one of the most versatile saw blades you can buy. It features a hss cutting edge, electron beam welded to a high-flex back, tempered for flex life to last as long or longer than the cutting edge. This is a good general purpose blade which can be used effec- tively on all band machines (cut-off and contour), except for very small and light-duty machines. Use the charts below to choose the length, tooth form and pitch for full time production on the jobs in your shop. Imperial Bi-Metal 100 Saw Blade Narrow Width- 100-Foot (30.5 m) Coils In Containers Claw Tooth Width Gage Nominal Set Type Catalog In. mm In. mm Pitch In. mm Set No. ---- 1/ 4 6.35 .035 0.89 6 .058 1.47 R 303-461 3/ 8 9.5 .035 0.89 4 .060 1.56 R 303-487 -- - 1/2 12.7 .035 0.89 6 .058 1.47 R 303-486 1/ 2 12.7 .035 0.89 3 .060 1.52 R 303-489 --- R = Raker W=Wave Imperial Bi-Metal 100 Saw Blade Wide Width- 150-Foot (46 m) Coils In Containers Claw Tooth Width Gage flom1oal Set Type Catalog In. mm In. mm Pitch In. mrn Set No 3/4 19 .035 0.89 3 .060 1.52 R 303-490 25.4 .035 0.89 3 .060 1 52 R 303-529 25.4 .035 0 89 4 .060 1 52 R 303·628 1-1/ 4 32 .042 1.07 3 .065 1.65 R 303-638 -- 2 51 .050 1.27 2 .080 2.03 R 303-677 2 51 .050 1.27 3 .080 2.03 R 303-693 ----- R = Raker W =Vlave 10
..
Powered by FlippingBook