TURNING INSERTS | POSITIVE RAKE
VCGX-AL
Precision Ground, High Positive, polished 35° diamond inserts for intricate profiling of Aluminum, non-ferrous materials and non- metallics. AL: Extremely high 25° positive rake geometry. Super sharp edgeline with polished face for smooth chip flow .
r
d
7º
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
NON-FERROUS
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
N425
NA425
VCGX 220.5-AL
VCGX 110302-AL 1/4 .436 1/8 .008 .010 - .062 .002 - .008
DPL100541
DPL100542
VCGX 221-AL
VCGX 110304-AL 1/4 .436 1/8 1/64 .016 - .087 .004 - .010
DPL100543
DPL100544
VCGX 222-AL
VCGX 110308-AL 1/4 .436 1/8 1/32 .020 - .087 .006 - .020
DPL100545
DPL100546
VCGX 330.5-AL
VCGX 160402-AL 3/8 .654 3/16 .008 .010 - .125 .002 - .008
DPL1005 53
DPL1005 54
VCGX 331-AL
VCGX 160404-AL 3/8 .654 3/16 1/64 .016 - .156 .004 - .010
DPL100549
DPL100550
VCGX 332-AL
VCGX 160408-AL 3/8 .654 3/16 1/32 .020 - .156 .006 - .020
DPL10055 7
DPL10055 8
VCGX 333-AL
VCGX 160412-AL 3/8 .654 3/16 3/64 .020 - .156 .006 - .031
DPL1005 60
DPL10055 9
VCGX 220512-AL
VCGX 220512-AL 1/2 .872 7/32 3/64 .020 - .187 .006 - .031
DPL100555
DPL100556
VCGX 220516-AL
VCGX 220516-AL 1/2 .872 7/32 1/16 .020 - .187 .006 - .031
DPL1005 45
DPL100 546
VCGX 220530-AL
VCGX 220530-AL 1/2 .872 7/32 .118 .020 - .187 .010 - .040
DPL1005 47
DPL1005 48
Ordering Example: 20 pcs VCGX 220530-AL N425; DPL100559
REFERENCE PAGES
4
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
62
Powered by FlippingBook